RAPID RESPONSE RESTORATION LLC
RAPID RESPONSE RESTORATION LLC
Mold remediation (removal) Biohazard clean up Meth Lab clean up Contaminants clean up
Mold remediation (removal) Biohazard clean up Meth Lab clean up Contaminants clean up
"},"url":"https://www.angi.com/companylist/us/tx/carrollton/moldlab-reviews-5540049.htm"},"position":3},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"ANCHORAGE WELL & PUMP SVC INC","address":{"@type":"PostalAddress","addressRegion":"AK","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"Linda Y."},"reviewBody":"They tested the system and found that the run capacitor was leaking, changed the control box, the pressure gauge and pressure switch. They found that there was a grounding problem, and replaced one of the wires from the junction box to the well, then set the pressure tank to the proper pressure. They did this in a timely fashion, answered questions courteously, and provided information about the system.
"},"url":"https://www.angi.com/companylist/us/ak/anchorage/anchorage-well-and-pump-svc-inc-reviews-4708099.htm"},"position":4},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"VCA East Anchorage Animal Hospital","address":{"@type":"PostalAddress","addressRegion":"AK","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"Claudia B."},"reviewBody":"I was really impressed with Dr. Keels expertise, kindness and restraint. She didn't order unnecessary tests or expensive procedures that come to naught."},"url":"https://www.angi.com/companylist/us/ak/anchorage/vca-east-anchorage-animal-hospital-reviews-4697613.htm"},"position":5},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"Mold Solutions","address":{"@type":"PostalAddress","addressRegion":"AK","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"Mike D."},"reviewBody":"mold removal went ok, bathroom remodel was a total joke, do the shower twice and still not satisfied
the vinal was put down three times and at this time I will look for another contractor to install a floor.
finaly told this contractor to leave the building and not return.
"},"url":"https://www.angi.com/companylist/us/ok/shawnee/mold-solutions-reviews-7957447.htm"},"position":6},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"Taylored Restoration","address":{"@type":"PostalAddress","addressRegion":"AK","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"John H."},"reviewBody":"The only suggestion I would make is to have a firm schedule if your work is time sensitive. Since they do a lot of fire and water remediation work they get called out on emergencies a lot resulting in the emergency taking precedence over your schedule.
"},"url":"https://www.angi.com/companylist/us/ak/anchorage/taylored-restoration-svc-reviews-4707660.htm"},"position":7},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"ServiceMaster of Alaska","address":{"@type":"PostalAddress","addressRegion":"AK","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"Annie P."},"reviewBody":"After being told by Taylored Restoration that the mold we found along a 20 foot stretch of wall was from animal urine, we went with Service Master to take care of our problem. We met Mike & Rick at the job site to explore the problem and discuss it's removal. Multiple times during the consultation we discussed the crew removing the drywall, cleaning, and then replacing the drywall. Everyone was in agreement. So when the estimate came in, and the last line simply stated "painting" we assumed they were to paint the wall. Considering this is something easily done, we declined to have them paint. Not a single person stopped us to explain that the painting referred to was a mold killing specialty paint. Basically, the purpose of the removal and to inhibit further growth should a stray spore be left.
The crew arrives an hour late (just like the consult) and begins their job. After they are finished and are removing their ionizing equipment I am told that another crew would get in touch about fixing the walls. When I heard nothing for a week, I called to check in, and lo and behold, the estimate was not for the drywall fix at all, but only the mold remediation. A separate estimate then came in for almost $800 to fix less than 20 square feet of drywall. At this point, the mold had been cleared, thus an insurance claim for the amount above our deductible could not be filed.
After the crew left, we went to check on the procedure and were completely devastated to find visible mold still left in the area. This was not stained wood, but actual spores which were visible to the naked eye. A supervisor did come out the next day to fix the problem - but aren't they supposed to do it right the first time?
After everything is said and done, and we bring in our own drywall person, I receive an overdue notice in the same envelope as the first bill I had seen. The bill was very different from the estimate - not only in price but also appearance. While the estimate was an exploded bullet list of items (3 pairs of gloves, 20 feet of sheeting, etc) which was over 5 pages long, our bill was 6 lines. When I questioned the charge for an ionozing/ozone unit billed in 24 hour increments, I was told the unit had been in our house longer than 24 hours and we were billed as such. I left the crew at my house at 9am on the morning in question, the unit could not have been used for at least 2 hours, and when I saw them at 8 am the nest morning, they were picking it up. Less than 24 hours. The bill also indicated that more than 1 pickup load of material was hauled away from the house. Not possible.
With 2 of the 6 lines questioned, I asked for an exploded version of our bill, formatted exactly like the estimate. I received another copy of the estimate. We went back and forth trying to track down an appropriate copy of the bill for OVER 2 MONTHS.
This is very suspicious to me. If you overcharge in one area, and then refuse to show the full bill, I am left to the conclusion that you are vastly overcharging and hiding your figures. After 2 months I was finally able to get a copy of the amended, correct bill.
In short, I understand it was our responsibility to comb through the estimate. However, it is their job to explain to the customer why an important step is needed, and be sympathetic to the fact that most of their customers are not fluent in the particular vernacular of their specific field."},"url":"https://www.angi.com/companylist/us/ak/anchorage/servicemaster-of-alaska-reviews-4708555.htm"},"position":8},{"@type":"ListItem","item":{"@type":"LocalBusiness","name":"VCA Alpine Animal Hospital","address":{"@type":"PostalAddress","addressRegion":"AK","addressCountry":"US"},"review":{"@type":"Review","author":{"@type":"Person","name":"Loretta R."},"reviewBody":"Good. Dr. Avril always calls and discusses the test results. Also if there are problems she will call just to check in to see how pet is doing."},"url":"https://www.angi.com/companylist/us/ak/anchorage/vca-alpine-animal-hospital-reviews-4707680.htm"},"position":9}]}
Renewal by Anderson replaced two large windows in my house two days before Xmas in 2019. The two employees, Robert and Griffin, showed up on time and installed the windows and molding quickly without any unnecessary loss of heat. The job was finished within a day and all the refuse was...
After contacting Moldlab we received a mold testing kit within 2 days. They also sent an email to say the kit was on it's way. After taking a surface sample with a q-tip , that was provided, it was labeled, placed in a plastic bag and mailed to the laboratory. We received an email to say the...
They tested the system and found that the run capacitor was leaking, changed the control box, the pressure gauge and pressure switch. They found that there was a grounding problem, and replaced one of the wires from the junction box to the well, then set the pressure tank to the proper...
The only suggestion I would make is to have a firm schedule if your work is time sensitive. Since they do a lot of fire and water remediation work they get called out on emergencies a lot resulting in the emergency taking precedence over your schedule.
After being told by Taylored Restoration that the mold we found along a 20 foot stretch of wall was from animal urine, we went with Service Master to take care of our problem. We met Mike & Rick at the job site to explore the problem and discuss it's removal. Multiple times during the...
Mold remediation (removal) Biohazard clean up Meth Lab clean up Contaminants clean up
Mold remediation (removal) Biohazard clean up Meth Lab clean up Contaminants clean up
Some states require mold removal specialists to be licensed, while others require licensed mold testing companies to create remediation protocols that any contractor can carry out. You can use our state licensing tool to find requirements in your area. In either case, it’s imperative that you hire an experienced professional for mold removal to ensure the safety of your home and your family.
It’s possible to scrub mold off of visible surfaces yourself, but it’s not usually a good idea. Mold is not only a potential health risk, but it’s also difficult to treat in its entirety, especially because it can grow behind walls and in other hidden areas a DIYer might miss. Since mold is a serious and often pervasive issue, you should hire a professional that will remove all of the mold—including any that might be hidden—run industrial air scrubbers to remove airborne particles, and complete mold testing to ensure the underlying problem is solved.
The most effective way to remove mold includes testing affected surfaces and the air for spores, creating a protocol for removal, carrying out the steps within the protocol, running air scrubbers for the recommended amount of time, and then completing a post-remediation round of testing to confirm the issue is solved. Since this work is very involved and there are health risks if done incorrectly, you should always hire an experienced professional to handle mold removal.
The average cost for mold remediation is around $2,200, and most projects fall somewhere between $1,100 and $3,300. Your total will depend on many factors, including the surface area that is affected by mold, the extent of the issue, how much building material your professional needs to replace, whether or not testing is necessary for safety reasons, and existing indoor air quality.
Mold removal will take between one and five days in most cases, but severe mold issues can take several weeks to correct. Your timeline will depend on how much mold there is in your home, where the mold is located, and how much testing and aftercare is required. If you have mold behind your walls or you have an excessive amount of mold that requires removal and running air scrubbers for several days, you could be looking at over a week for the process to be completed.
From average costs to expert advice, get all the answers you need to get your job done.
Budgeting for an indoor air quality test can be worth the cost if you are worried about your health or have moved into a new home.
Mold remediation cost can quickly escalate. But if you have mold in your home, the cost for mold remediation is worth it.
The cost of a mold inspection might seem high, but it’s one of the best investments you can make for your health and home. Read on to learn cost-saving tips.
Acceptable moisture levels in drywall depend on the relative humidity in your home and a few other factors. Use this guide to learn what's okay and what's not.
Not sure what type of mold is forming in your home? We’re breaking down black mold vs regular mold.
The best way to keep your home free of unwanted bacteria is to know how to get rid of mold in advance. Stay on top of it with a few tips and tools.