Can you put a doorway in a structural wall?

• <div><p>Yes, you can put a doorway in a structural wall; in fact, most exterior doors are set into structural walls. The project is a little more challenging than installing a door in a non-load-bearing wall because you need a structural engineer to assess the wall and make sure it’s safe to create a wall opening. Your engineer’s report will include instructions for your contractor on how and where to install additional supports, like steel headers above the door, to distribute the weight above to the wall on either side of the door.</p></div>

Get matched with top structural engineers in Sand Point, AK

Q: How do various elements of desk design impact the overall assembly cost?

• <div><p>Costs depend on desk size, labor, included features like drawers or motorized height adjustments, and required wall anchoring.</p></div>

Q: What do structural engineers look for when doing an inspection?

• <div><p>Structural engineers typically conduct inspections during a home sale or renovation, looking for signs of structural damage in various structures throughout the building, such as load-bearing walls, joists, beams, roofing trusses, foundations, and chimneys. Some of the warning signs that structural engineers check for include:</p><ul><li><p>Dry rot</p></li><li><p>Infestation</p></li><li><p>Shifting or<a href="https://www.angi.com/articles/quarter-inch-crack-my-foundation-major-concern.htm"> cracking foundations</a></p></li><li><p>Erosion</p></li><li><p>Water damage</p></li><li><p>Sagging, shifting, or damaged walls, ceilings, or roofing support</p></li></ul><p></p></div>

Q: What building codes apply to spiral staircases?

• <div><p>Building codes for spiral staircases will vary by your location. Most local codes will specify minimum tread width, riser height, handrail requirements, and headroom. These standards help ensure safety and accessibility for all users. Always check local codes before you begin the installation to ensure compliance and avoid costly modifications or fines.</p></div>

Q: Is a structural engineer the same as a foundation engineer?

• <div><p>Structural engineers specialize in all aspects of a building&rsquo;s structural integrity, including the foundation. Foundation engineering is a critical part of structural engineering, so structural engineers are experts in foundation design. Many foundation repair companies either have a structural engineer on staff or one they work closely with, so be sure you look for that when deciding <a href="https://www.angi.com/articles/who-do-i-hire-foundation-repair.htm">who to hire for foundation repair</a>.</p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your structural engineering project in Sand Point, AK?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Sand Point, AK

*The Angi rating for Structural Engineering companies in Sand Point, AK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Sand Point, AK is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on October 26, 2025

Reviewed in July 2023
LLCs offer flexibility in terms of management structure, allowing for a single-member or multi-member setup based on the business's needs.
All Country Construction, LLC
Request a quote
Reviewed in September 2017
After I cut a few holes in the ceiling and consulted with an engineer to ensure the wall was not load bearing, Dave and his son made quick work of the demolition and had the new drywall up in a day and half. We are very pleased with the work that was performed.
Jensen Construction
Request a quote
Reviewed in August 2017
Work took much longer than estimated. Then, when the engine died less than a year later, they refused to stand by their work. Ended up going to Specialized Import Auto Repair for a new (used Japanese) engine, and have been very happy with their work.
SUPERIOR AUTOMOTIVE SVC
Request a quote
Reviewed in February 2016
I met the owner and he listed to the engine with a mechanic's stethascope in the parking lot. He said he believed the sound was in the bottom half of the engine and around cylinder's 3 and 4. I explained that I had done a compression test and all 6 cylinders passed with flying colors so I knew...
SAND LAKE AUTOMOTIVE
Request a quote
Reviewed in June 2015
It went very well. I was very happy with the explanation and diagram. I'm afraid somebody else may have taken advantage of the situation and/or not realized what was involved and install it anyway, leaving me with structural problems. I'm vary thankful I was advised of the work that would...
Bruce Roberts & Company
Request a quote
Reviewed in January 2014
We recently purchased a house that we thought was "move-in ready," as in we wouldn't have to do any remodling or repairs - within 2 weeks of moving in our septic system failed. A+ took care of all the engineering, permitting, and materials procurement for the job. I should have contracted them...
A Plus Home Services Inc
Request a quote
Reviewed in September 2013
I took my vehicle in to check the engine because the light was on because of a suspected fault with my emissions system. They hooked up my car and said yes, they confirmed it was bad and needed to be replaced, but they said that those issues weren't worth fixing because I had more serious...
TUDOR AUTO CARE
Request a quote
Reviewed in February 2013
This is not an easy job by any means. This engine is insanely mean, exactly like they said it would be. Great job guys!!
AK CYCLES
Request a quote
Reviewed in October 2012
David Fritz P.E. (professional engineer registration); Missed many items during the home inspection which cost me additional money to repair after I purchased the home. Failed to test all the electrical GFIs & electrical outlets in the house, many were in poor condition. Later myself &...
David Fritz
Request a quote

Find Structural engineers in Sand Point

No results for Structural Engineering in

Try adjusting your search criteria.

Structural Engineering questions, answered by experts

Yes, you can put a doorway in a structural wall; in fact, most exterior doors are set into structural walls. The project is a little more challenging than installing a door in a non-load-bearing wall because you need a structural engineer to assess the wall and make sure it’s safe to create a wall opening. Your engineer’s report will include instructions for your contractor on how and where to install additional supports, like steel headers above the door, to distribute the weight above to the wall on either side of the door.

Costs depend on desk size, labor, included features like drawers or motorized height adjustments, and required wall anchoring.

Structural engineers typically conduct inspections during a home sale or renovation, looking for signs of structural damage in various structures throughout the building, such as load-bearing walls, joists, beams, roofing trusses, foundations, and chimneys. Some of the warning signs that structural engineers check for include:

Dry rot
Infestation
Shifting or cracking foundations
Erosion
Water damage
Sagging, shifting, or damaged walls, ceilings, or roofing support

Building codes for spiral staircases will vary by your location. Most local codes will specify minimum tread width, riser height, handrail requirements, and headroom. These standards help ensure safety and accessibility for all users. Always check local codes before you begin the installation to ensure compliance and avoid costly modifications or fines.

Structural engineers specialize in all aspects of a building’s structural integrity, including the foundation. Foundation engineering is a critical part of structural engineering, so structural engineers are experts in foundation design. Many foundation repair companies either have a structural engineer on staff or one they work closely with, so be sure you look for that when deciding who to hire for foundation repair.

The Sand Point, AK homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Dan Simms
•
Aug 14, 2025Aug 14, 2025
How Much Does a Structural Engineer Cost to Hire? [2025 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total.
Deirdre Sullivan
•
Oct 13, 2025Oct 13, 2025
How Much Does It Cost to Vault a Ceiling? [2025 Data]
Looking to expand your ceiling and send claustrophobia running for the hills? This guide covers the cost to vault a ceiling and factors that impact estimates.
Rachel Hoffman
•
Jun 6, 2025Jun 6, 2025
2025 Cost to Replace a Main House Support Beam
A damaged main support beam can cause serious structural damage to your house. Learn how much it costs to replace a main house support beam.
Dan Simms
•
Oct 31, 2024Oct 31, 2024
Everything You Need to Know About Lally Columns
Wondering what a lally column is? Learn what it is, how it works, when you need one, and the pros and cons in this simple guide.
Em Norton
•
Nov 11, 2024Nov 11, 2024
Everything to Know About LVL Beams
What is an LVL beam? Read about LVL beams to determine if this material is safe and suitable for your project.
Dan Simms
•
Nov 15, 2024Nov 15, 2024
What Is a Structural Engineer and Do You Need One?
Learn what a structural engineer is, what they do, when you might need to hire one for your home project, and how much they charge.