It costs an average of $3,849 to install a new furnace in Atlanta, but you might spend $2,103 to $5,607, depending on the specifics of your project. An HVAC pro can explain what affects these costs and provide an accurate quote.
The furnace type has a big impact on your overall new furnace costs in Atlanta, Georgia.
Your furnace size and efficiency rating will also influence the price of this project.
When installing a new furnace, budget for permits and professional labor as well.
The average new furnace cost in Atlanta, Georgia, is $3,849. However, you might pay between $2,103 and $5,607, depending on the type of furnace, the condition of your existing ductwork, and other factors. This guide breaks down how each of these variables affects your furnace installation costs so you can budget accordingly.
The type and size of your furnace have a significant impact on your overall costs, but there are other factors at play, too. Here are the main ones.
From electric to natural gas to oil, the type of furnace you install will directly affect the price of your project. If you’re looking for a lower-cost or eco-friendly option, you could go with an electric furnace, which starts around $600. On the other hand, natural gas furnaces often cost more upfront but less to operate over time since natural gas prices tend to be lower than electricity prices.
Furnace Type | Average Cost Range |
---|---|
Electric | $600–$2,600 |
Natural gas | $700–$3,000 |
Propane | $800–$3,000 |
Oil | $1,000–$4,000 |
Your HVAC technician will determine the right size furnace for your home—another factor that will impact your final costs. Furnace sizes are listed in British thermal units (BTUs), which measure the unit’s heat output. As you might imagine, furnaces with higher BTUs can produce more heat, but they also come with higher price tags.
Again, it’s best to have a qualified HVAC pro choose your furnace size. To do this, they’ll use a complex formula—known as a Manual J load calculation—that considers your house’s square footage, insulation, ductwork, and a number of other factors.
However, you can get an idea of how much different-sized gas furnaces cost in the table below.
Furnace Size in BTUs | Average Cost Range |
---|---|
40,000–60,000 | $700–$2,000 |
60,000–80,000 | $800–$2,200 |
80,000–100,000 | $900–$2,500 |
100,000–120,000 | $1,000–$2,700 |
120,000–140,000 | $1,100–$3,000 |
Your furnace’s AFUE rating, short for Annual Fuel Utilization Efficiency, measures the percentage of fuel it converts into heat. Furnaces with high AFUE ratings (90% or more) can be twice as expensive as standard-efficiency units with AFUE ratings between 80% and 89%.
However, since higher-efficiency furnaces require less fuel to run, the long-term operating costs will be lower. Over time, that type of savings can add up, especially in Georgia, where natural gas prices are consistently higher than national averages, according to the U.S. Energy Information Administration (EIA).
In some cases, you'll have to replace your ductwork when installing a new furnace. For example, if there are leaks, cracks, or mold in your existing air ducts, your pro may recommend adding new ductwork.
On average, ductwork replacement costs between $440 and $1,290, but an HVAC pro can provide a specific quote based on your home size, duct locations, and other factors.
If you already have a furnace, your furnace installation pro in Atlanta, Georgia, will need to remove it before installing the new one. They’ll typically charge a few hundred dollars to remove and responsibly dispose of the old furnace.
Beyond the costs of the furnace and ductwork, also plan for the following expenses.
In Atlanta, when you contact an HVAC technician to install your new furnace, they must have a valid Conditioned Air Contractor license from Georgia’s division of Conditioned Air Contractors. Before hiring someone, confirm the status of their license on the Georgia Online Application Licensing System (GOALS) website.
You might also consider choosing a NATE-certified technician for this project. While optional, having a certification from North American Technician Excellence means the furnace pro near you has the proper skills and up-to-date industry knowledge to install your furnace correctly.
The city of Atlanta requires a mechanical permit for all furnace installations. When you hire a contractor for this project, they should obtain the permit on your behalf (and their quote should include the cost of the permit itself and any charges for pulling it).
In Atlanta, permit fees vary depending on the exact details of your project. But as an example, let’s say you’re planning to add a new furnace and replace some of your old ductwork at the same time. Here’s how Atlanta’s permit fee breaks down.
Expense | Average Cost |
---|---|
Technology fee | $25 |
Small heating system (up to 500,000 BTUs) | $50 |
Duct alterations | $40 |
Base fee | $150 |
Total | $265 |
Georgia might not get as cold as some other states along the East Coast, but winter nights in Atlanta can still get quite chilly. By replacing an old or inefficient furnace before selling your home, you’ll make it more appealing to potential buyers—and increase its resale value in the process.
If you’re investing in a new furnace, it’s also worth considering upgrading your air conditioner at the same time. Having an updated cooling system is particularly attractive in Atlanta, where summers are notoriously hot and humid. After replacing both parts of your HVAC system, you could see a 5% to 7% increase in your home’s resale value.
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.