
A damaged septic system can leak odors and sewage, so repairs are urgent. Find out how much septic tank repair costs based on repair type, tank size, and more.
Most people pay $1,600 to install a sewer line in Orlando, Florida, but depending on materials and labor costs in your area, you may end up paying between $515 and $2,685.
New sewer line installations in Orlando commonly use PVC or ABS pipe.
Consider replacing cast-iron pipes that corrode prematurely in Florida’s climate.
Certain homes in Orange County are required to have sewer connections as part of House Bill 1379.
Sandy soil can create excavation challenges during site prep.
The cost to install a sewer line in Orlando, Florida is $1,600 on average, with most homeowners spending between $515 and $2,685. The Sunshine State has relatively strict environmental regulations that impact sewage treatment. If your toilets are backing up, strange smells are permeating throughout your home, or there’s an extra-lush patch of grass on your lawn, you could have a sewer line issue.
The following factors outline the information you need to budget for this expense.
The cost of sewer line installation in Orlando, Florida, is impacted by several factors. Sandy soil can create challenges with excavation, and older homes may have outdated piping that needs a full replacement rather than repairs—both of which increase costs. A qualified sewer line repair pro in Orlando will be able to navigate these challenges and plan the best installation for your home.
The average cost to install a sewer line in Orlando ranges from $50 to $75 per linear foot, but it can cost up to $300 for complex jobs. Sewer line pipes are about 5 inches in diameter and run underneath your yard from your house to the main sewer drain.
Installation Size (Linear Feet) | Average Cost |
---|---|
10 | $500–$750 |
20 | $1,000–$1,500 |
40 | $2,000–$3,000 |
60 | $3,000–$4,500 |
80 | $4,000–$6,000 |
100 | $5,000–$7,500 |
To install a sewer line, you’ll need to purchase the pipes that connect the main sewer drain to your home. The average new pipe costs about $3 to $20 per linear foot, but specialized materials can exceed that.
The main types of sewer pipes used for new sewer lines in Orlando are PVC or ABS. If you have an older home, you may find cast-iron, clay, or Orangeburg piping (the latter isn’t used in new construction anymore). In this case, you may choose to replace your entire sewer line with PVC or ABS instead of just the damaged section. Cast iron, in particular, can prematurely degrade in Florida’s humid, salt-heavy climate.
Factor in the type of piping material to gain a closer estimate per linear foot by referencing the following chart:
Type of Pipe | Cost per Linear Foot (Material Only) | Pros | Cons |
---|---|---|---|
PVC | $3–$10 | Go-to option for Florida sewer lines, resists corrosion and tree root intrusion, affordable | Shorter lifespan than metal piping, sensitive to temperature changes |
ABS | $5–$11 | Resists corrosion and tree root intrusion, budget-friendly | BPA content can leech into water, warps in sunlight (if exposed), noisier than PVC |
Cast iron | $20–$75 | High strength and durability, sound insulation | Prone to premature corrosion due to weather and soil conditions, repairs are costly |
Clay | $50–$60 | Resists chemical degradation like plastics, environmentally friendly, highly durable | Vulnerable to tree roots, costly to install, prone to cracks |
The biggest factor that determines the cost of your installation is whether you need to dig a trench. If you’re replacing a sewer line, you may opt for a trenchless sewer repair, which minimizes the impact on your landscape. Common land prep costs include:
Trenching: $4–$12 per linear foot
Pipe disposal (replacement only): $250
Boulder removal cost: $650–$1,200 per boulder
Tree removal cost: $200–$2,000 per tree
Pavement removal cost: $8–$15 per square foot
Though you can technically pull your own permit in the state of Florida, it’s not a good idea to install your own sewer line. This job has strict code regulations, so you can be held liable for damage to the public sewer system from an improper installation, which could void your homeowners insurance.
Labor costs account for about 50% of a sewer line installation, and if you run into issues due to Orlando’s high water table, excavation costs could push that number higher. Here’s how the costs break down.
The City of Orlando charges $50 for a permit to connect to the public sewer system. Those installing a sewer line in brand-new construction will have to pay the one-time residential sewer impact fee, which costs about $2,550. The permit costs $75 if you’re replacing an existing sewer line, but it depends on the specifics of the installation.
After the passing of House Bill 1379, many homes in designated areas of Orange County will need to connect to the public sewer system or install a nitrogen-reducing septic system. Even if you fall outside of those areas, there are cases in which aging sewer lines need to be replaced.
Most sewer line repair pros in Orlando charge $65 to $75 per hour for their labor. The city requires these plumbers to carry a license that allows them to operate inside of the county. They may work with subcontractors to help with the excavation, but all plumbers must be registered with the Florida Department of Business and Professional Regulation (DBPR) before they can take on a job.
Sewer line installation doesn’t increase home value, but it can help you maintain your value. In other words, keeping up with maintenance and ensuring your system is in good shape helps prevent a decrease in value. This is especially true if you live in an older house with cast-iron pipes, which prematurely corrode in Florida’s climate and can lead to a wealth of plumbing issues that may scare off potential buyers who don’t want to shoulder the expense.
Beyond damaged pipes, homeowners with standard septic systems in the areas designated by House Bill 1379 can preserve their home value by upgrading their septic system or connecting to the public sewer system. It may not make or break a sale, but a buyer may not be willing to pay the full asking price for a home when they know it needs this costly upgrade.
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We survey real Angi customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
From average costs to expert advice, get all the answers you need to get your job done.
A damaged septic system can leak odors and sewage, so repairs are urgent. Find out how much septic tank repair costs based on repair type, tank size, and more.
The cost of converting a cesspool to a septic system depends on factors like labor, complexity, and materials. Use our guide to estimate your budget.
If it’s been there for a while, it can be hard to find the septic tank in your yard. Learn how much it costs to locate a septic tank with this guide.
Septic tank odor is a foul smell that may be a sign of a costly clog or leak. Here are seven common causes of a septic smell in the house, plus how to fix it.
Not sure what you can put over your septic field? Use this guide to keep your leach field safe from damage and avoid issues with percolation.
Wondering what to do if you smell sewer gas in your house? Fortunately, the problem is relatively easy to prevent and fix—here’s how.