Replacing a water main in Los Angeles is expensive, but certainly not the nation’s highest—or even California’s. Living in the Hills or on the coast can affect the total cost.
How Much Does Rerouting a Plumbing Vent Cost?
Normal Range: $900 - $3,000
The cost to reroute a plumbing vent ranges from $900 to $3,000, with a national average of $1,500. Budget for more if you expect drywall, roof, or floor repairs.
How we get this data
Photo: Dmitry Bakulov / iStock / Getty Images Plus
Photo: Dmitry Bakulov / iStock / Getty Images Plus
Cost Insights
You should hire a licensed plumber to reroute a plumbing vent, with labor costs between $45 and $200 per hour.
Rerouting vent pipes often comes with some remodeling requirements: Hole repair can cost between $400 and $900, while roof pipe work costs around $1,000.
Most piping costs around $1 per foot, although copper piping will be more expensive at $3 per foot.
If a permit is needed for the plumbing project, especially if roofing work is involved, expect to add $50 to $500 to the bill.
Rerouting a Plumbing Vent Cost Breakdown
The total cost of rerouting a plumbing vent depends on the materials used, any repairs you’ll need after the move, and overall labor costs.
Labor
There are two types of professionals you can hire to tackle this job, either a plumber or a handyperson. Hiring a local licensed plumber will cost anywhere from $45 to $200 per hour. This ensures the job is bonded and warrantied, but you may need to hire a handyperson anyway if there's drywall damage. Contact at least three plumbers for quotes so you can get the best price possible.
The average hourly cost of a handyperson is about $40 to $140 per hour if you choose to opt for a handyperson to take on this project. Not all handypersons are licensed, so warranties on work are not guaranteed. But you wouldn’t likely have to hire someone else to tackle the repairs needed to complete the job.
From one homeowner to another
Shaddai Plumbing team is great! They are very professional, they keep their word, they complete job without delays. Great quality. We had to replace old water pipes across 2-story home and their service was great. We asked to add additional water switches to be able to switch hot/cold water on and off in separate parts of home - and they did it. Now if it will be leak or other problem - we can switch off kitchen area, or second floor without impacting other parts of our home. Highly recommended!
Review of Shaddai Plumbing, LLC, in Naples, FL
Repairs
| Repair Types | Cost |
|---|---|
| Hole repair | $300–$900 |
| Roof pipe rerouting | $1,070 |
| Flooring repairs | $200–$600 |
Repairs may be needed if rerouting the pipes means cutting into the floor, roof, or walls. The cost to repair holes in drywall can range anywhere from $300 to $900 or more, depending on the size and severity of the holes. Hiring a handyperson to reroute the plumbing vent may mean that the drywall repair price is included in the project, rather than coming in separately.
If you’re rerouting your plumbing vent pipe on your roof, then you can expect to pay around $1,070 on average for roofing repairs. Patching up a roof requires more material to ensure Mother Nature doesn’t make a surprise visit to your living room one day.
Floor repairs will come down to the flooring material you currently have. The average cost of flooring repairs is around $400 but can range from $200 to $600.
Materials
Photo: photovs / iStock / Getty Images Plus
Simple projects that only require a small PVC pipe, a little cement, and a cap will cost significantly less than a larger scope project. Small projects include rerouting an easily accessible plumbing vent underneath a sink or in a basement.
More extensive projects, such as rerouting a plumbing vent to exhaust in a different location of the home, will cause a significant price hike. This type of project includes the cost of drywall repair, roof repair, and much larger amounts of piping.
| Materials | Average Cost |
|---|---|
| CPVC piping | $1 per linear foot |
| Pex piping | $1.15 per linear foot |
| Copper piping | $3 per linear foot |
| Primer | $10–$20 per gallon |
| Cement | $20–$30 per gallon |
| Flux | $5–$15 per 8 oz. |
| Solder | $20–$35 per 8 oz. |
Permits
Doing work on the roof may require a building permit. You should ask your local municipality if this is necessary, as it varies from city to city. Minor building permits for this type of project cost anywhere from $50 to $500 on average.
DIY vs. Hiring a Pro to Reroute a Plumbing Vent
Because of the complex nature of working with the plumbing system of your entire home, it’s best to let a local professional handle this job. If the new pipes aren’t installed correctly, your home's sewage system may start to back up and the lines can act irregularly. Of the different types of plumbing repairs, this would fall under repairing a water main and likely cost around $900 on average.
How Angi Gets Its Cost Data
Home is the most important place on earth, which is why Angi has helped more than 150 million homeowners transform their houses into homes they adore. To help homeowners with their next project, Angi provides readers with the most accurate cost data and upholds strict editorial standards. We extensively research project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We rely on reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Want to help us improve our cost data? Send us a recent project quote to [email protected]. Quotes and personal information will not be shared publicly.
Frequently Asked Questions
The homeowners guide to plumbing services
From average costs to expert advice, get all the answers you need to get your job done.
Discover what impacts main water line repair costs in Los Angeles, such as soil conditions and permits, so you can confidently plan your project.
How much does a plumber cost in Los Angeles? Learn what impacts plumbing costs in the City of Angels and how to hire the best plumber in LA for your project.
Understanding the difference between plumber's putty and silicone will help you choose the right one for the job—read on to find out more.
Range hood dripping water? You may have damaged flappers or need more insulation. Find out what’s causing the problem and call the right professional to fix it.
The hidden parts of your shower drain keep everything flowing. Reference our shower drain plumbing diagram to understand how your shower drain works.