"Casey suggested a better route to go about doing the retaining wall. instead of a concert wall he did retaining blocks. It looks great and he did a profession job in all aspects."
"It is a waste of money. The great majority of people are not going to find any value out of the service. If you need design consultation, you need a full service consultation. If you already have knowledge and experience, and you just need to get a few ideas, then you don't need to pay for that. You can just get a magazine or a book since you already have the knowledge of basic designs in your head or a little bit of experience. To have someone call you and give you information over the phone, you are not getting the personal service that you need. You may as well take the money $49 and apply it to something else like getting someone else to come out and give you the service that you need. Because, you are not getting much, you are not getting anything at all. They are going to have you do the work. After talking to them and I was talking to other home designers, I found out that that was a waste of time and waste of money. I gave them a C because they didn't fail at what they do but they don't offer any value for what they do. There's not much value to it. The cost was fair. They didn't do a terrible job and the cost isn't terrible, it was only $49. It just has a very low value. For responsiveness I gave them a B because they will answer your phone and answer your emails."
"I was so impressed with the WILD HORSES crew! They performed a very professional job. Travis and his boys are great to work with. Once they were finished, we had a clean and beautiful outcome. I would recommend these guys for any asphalt roofing project."
"Looking for a reasonable rate and received the highest quality. No need to look any further this is the contractor you need to have in your favorites. Best experience I have had ever! Professional and courteous!!"
"All the work was on time and to satisfaction! The crew was kind and professional! I would definitely use this company again for all my home improvements!"
Cole Custom Cabinets is your one-stop shop for custom cabinets and countertops. Our business has over 50 years of experience, and rest assured, we guarantee top quality! We build vanities, countertops, cabinets, and shelving, all ON SITE. In fact, we do everything here but grow the tree! Please feel free to send us anything that inspires you; we'll use this as a starting point to create your perfect design. Once build is complete, we offer installation as well. Stop by the Casper, WY, showroom or call us for more information.
The best of the best in custom barn wood furniture. High end look, classy style and a refined precision! The only one in the nation with this style available to the world. We ship anywhere in the world, mainly in the United States. If you are seeking farmhouse, reclaimed, barnwood (barn wood), vintage, rustic, shabby chic, nostalgic, classic, aged, weathered and handcrafted wood furniture, ReBarn Custom Home Furnishings is the highest standard of barnwood furniture a person can own
Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.
The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.
It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.
Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.
Professionals ensure precise alignment and durability, critical for structural integrity.
You don’t need a cutting board. In fact, cutting is the original purpose of butcher block countertops. That said, wood is porous and can harbor germs. You’ll need to clean your countertop thoroughly after use. Knives can also scratch the surface. This adds to the patina of the wood, but not everyone likes the look—in which case, you may want to use a cutting board.
Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.
For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.
After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.
Joists do distribute their load to beams, but they don’t sit on top of the beams. Instead, home builders nail or screw the joists directly to the beams such that the end of the joist butts up against the edge of the beam. Beams can sit on other beams for support, but you’ll never see a joist sitting on top of a beam or another joist.
The Wamsutter, WY homeowners’ guide to woodworking services
From average costs to expert advice, get all the answers you need to get your job done.
It’s not uncommon to have scrap wood lying around your garden, but there are plenty of creative projects that will help you give those spares a second life.
Learn how to hire a bookshelf building pro with expert tips on finding qualified carpenters, asking the right questions, and getting quality custom shelving.
Sandpaper has a plethora of uses, which is why there are so many options. Learn about the various sandpaper grits to choose the right grit for the project.
