Best siding pros near Ridgeley, WV

The recommended PSI (pounds per square inch) for cleaning vinyl siding can vary, so it's best to consult the manufacturer's guidelines. Generally, vinyl siding can handle high pressure, from 2,500 to 3,500 PSI. For comparison, more delicate materials like wood and aluminum siding should not face more than 1,500 PSI. To safely disperse the pressure on vinyl, use a tip with a wider spray span, such as a green (25-degree) or yellow (15-degree) nozzle. For routine cleaning of light dirt, a garden hose with a spray nozzle may be sufficient. Always exercise caution to avoid using excessive pressure that could damage the siding.

Stucco is considered a type of cladding because it includes a built-in ventilation layer, a weatherproof membrane beneath that, and, often, a layer of insulation to improve building efficiency. The multiple layers of stucco—the scratch coat, the brown coat, and the finish coat—also create a more complex building membrane, so it’s more accurate to call it cladding. However, homeowners and contractors alike refer to stucco as siding.

Concrete log siding offers some cost savings when compared to wood logs. Real wood logs require ongoing maintenance that can total up to $750 annually, while concrete log siding doesn’t require annual maintenance. Since concrete log siding exceeds the requirements of most building codes, it can also lower insurance premiums and boost resale value.

Yes, you can install siding over stucco, but it's crucial to ensure the stucco is in good condition first. Before proceeding, inspect the stucco for any signs of damage, leaks, or mold growth. If you discover water damage, mold, or have ongoing leak issues, it's recommended to remove the stucco completely. This step prevents future problems like mold and pest infestations and allows a professional to repair or replace any damaged sheathing underneath. If the stucco is sound, the installation process involves attaching furring strips to the wall's framing directly through the stucco. The new siding is then installed onto these furring strips. A professional may also need to adjust window and door openings to prevent them from being recessed behind the new siding, which can cause aesthetic issues and create potential leak points.