Get matched with top siding pros in Point Pleasant, WV

Yes, you can install siding over stucco, but it's crucial to ensure the stucco is in good condition first. Before proceeding, inspect the stucco for any signs of damage, leaks, or mold growth. If you discover water damage, mold, or have ongoing leak issues, it's recommended to remove the stucco completely. This step prevents future problems like mold and pest infestations and allows a professional to repair or replace any damaged sheathing underneath. If the stucco is sound, the installation process involves attaching furring strips to the wall's framing directly through the stucco. The new siding is then installed onto these furring strips. A professional may also need to adjust window and door openings to prevent them from being recessed behind the new siding, which can cause aesthetic issues and create potential leak points.

If you buy new cedar, the process of cutting it usually roughs up the surface enough that it doesn’t require sanding. However, if you buy older cedar or you’re repurposing it from another application, it’s a good idea to sand it. This helps the stain settle into the grain, and results in a more uniform appearance.

The recommended PSI (pounds per square inch) for cleaning vinyl siding can vary, so it's best to consult the manufacturer's guidelines. Generally, vinyl siding can handle high pressure, from 2,500 to 3,500 PSI. For comparison, more delicate materials like wood and aluminum siding should not face more than 1,500 PSI. To safely disperse the pressure on vinyl, use a tip with a wider spray span, such as a green (25-degree) or yellow (15-degree) nozzle. For routine cleaning of light dirt, a garden hose with a spray nozzle may be sufficient. Always exercise caution to avoid using excessive pressure that could damage the siding.

Siding and cladding are two popular exterior wall coverings that protect homes from the elements and provide insulation, but they differ in design and application. Siding is applied directly to a home’s exterior, providing some insulation and basic shielding from the elements. In contrast, cladding is installed indirectly over furring strips, creating a ventilated air gap for enhanced insulation and moisture control.