Get matched with top roof ice and snow removal pros in Peterstown, WV

When starting the engine, you typically leave the choke on a snowblower in the "choke" or "closed" position. After starting, let the engine run for a few minutes to warm up. Then, gradually open the choke, moving it to the "open" or "run" position, allowing more air into the engine and transitioning to a normal fuel-air mixture. The exact duration varies based on the snowblower model and ambient temperature, but as a general rule, you should open the choke once the engine has stabilized and runs smoothly, typically within a few minutes.

If not removed, ice dams can damage your gutters, roof, and home’s interior. The weight of these heavy ice formations can break gutters and downspouts. Water intrusion can happen underneath ice dams when there’s no way for melting snow to drain off the roof, and roof sheathing, walls, ceilings, and attic spaces can suffer water damage.

You can use hot water to melt ice from your driveway, but there are some serious caveats. Very hot water can quickly melt ice and remove it, which is helpful if you’re very short on time and need a solution ASAP. However, it will only work across a small area, after which there’s a chance the water will freeze again. The sudden clash of temperatures is dangerous for fragile materials, notably windows and other glass, so you’ll want to keep the water away from your car.

That depends on the size of your snow blower and how efficiently it uses fuel. Most snow blowers will last between 1 and 2 hours on a full tank of gas. Larger blowers tend to use fuel more quickly and need refilling more often.

Keep in mind, the average snow blowing project for a home driveway takes around 30 minutes. Large driveways and yards will take around an hour. A full tank of gas should be more than enough for snow removal, although the height of the snowfall will have an effect, too.