Get matched with top roofers in Jane Lew, WV

The placement of snow guards depends on the individual roof, but typically snow guards are placed between 12 and 18 inches from the eaves, though they can be placed as close as six inches and as far as 24 inches from the eaves. A roofing professional can assess the roof and potential snow loads to determine the best placement.

Furring strips (also called wood stripping) are not always necessary for a metal roof installation, but they are highly recommended and may be required by local building codes or the roofing manufacturer's specifications. There are several key reasons to use them:

• Energy Efficiency: Furring strips, made of wood or metal, create an air gap between the metal panels and the roof deck. This acts as a thermal break, reducing heat transfer into your home and improving overall energy efficiency.

• Moisture and Condensation Control: The air gap allows for better airflow, which helps prevent moisture buildup and condensation under the metal panels.

• Structural Support: They provide a solid, even frame to which you can attach the metal roofing panels.

It is especially important to use furring strips when installing a metal roof over existing shingles. Without them, the roof surface can be uneven, and you will experience greater solar heat gain.

There should be small gaps between your roof and the walls of your home, and other buildings. These small gaps let building materials shift, expand, and contract with weather and other outside forces, and they prevent moisture from wicking down walls from roofing and gutter systems. Without these strategic gaps, your home’s exterior and its finishes can sustain water damage, decay, peel, delaminate, and crack. However, there is a fine line between a smart gap and a problematic gap—all  gaps should be small, intentional, and covered or filled in with foam insulation to prevent pests from using them as access points.

A metal roof can last anywhere from 15 to over 100 years, with an average of 50 years, depending on the material, installation, and environment. The specific metal is a key factor: aluminum roofs may last 20 to 45 years, while steel can last 30 to 60 years. Tin can last for up to 75 years, and more durable options like zinc, stainless steel, and copper can last from 80 to over 100 years. Factors that can shorten a metal roof's lifespan include living in a coastal region with corrosive salt air, improper installation (such as laying over old shingles), and failing to inspect and replace fasteners, which may wear out before the panels.