Top-rated carpenters.

Get matched with top carpenters in Grafton, WV

Enter your zip and get matched with up to 5 pros

Need a pro for your carpentry project in Grafton, WV?

Select your specific project to find the pro for you.

Find Carpenters in Grafton

GG Handyman Services
4.7(
14
)

Serving Grafton, WV and surrounding areas

Approved

Super Service Award Winner

Free estimates

Emergency services offered

Warranties offered

"David and Josh are the best! They have done multiple projects around our home. I would highly recommend this company for any job large or small. They are very professional, honest, hard working and meticulous and the costs are reasonable. They totally understand your needs and what they have to do to accomplish the task at hand. We have hired them to installed exterior and interior doors, correct some small plumbing issues, some bathroom remodeling, tree removal. You name it and Im sure they can do it. We will have them back in the spring for additional outdoor work we need done. I can't say enough about much we like and trust this company and the work they have done for us."
Handyman Services Project
Handyman Services Project
Bathroom Remodel
Bedroom and Walk in Closet
Handyman Services Project

+13

Response time2 days
Response rate100%
Recommended by84%of homeowners
Avatar for Sentri Homes
Sentri Homes
2.9(
37
)

Serving Grafton, WV and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."
25 neighbors recently requested a quote
Avatar for S & P General Contracting
S & P General Contracting
3.7(
7
)

Serving Grafton, WV and surrounding areas

Approved

In business since 2022

Free estimates

Emergency services offered

S&P is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

Response time1 day
Response rate89%
1 neighbors recently requested a quote
A Home Handyman
5.0(
1
)

Serving Grafton, WV and surrounding areas

Approved

In business since 2010

Free estimates

Offers commercial services

A Home Handyman is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

Avatar for Kinsley floor and more
Kinsley floor and more
New to Angi

Serving Grafton, WV and surrounding areas

Approved

I’m 34 years old . Background in masonry and have been working on finishing homes for the past 4 years . From laying floor to painting the ceiling. Truthful and upfront, will not take in a job that I know I can’t complete with 100% satisfaction

Berger's Table Pad Factory
4.8(
1,345
)

Serving Grafton, WV and surrounding areas

In business since 1983

Free estimates

Credit card accepted

"After purchasing an Angie's List Deal, I received the measuring kit in the mail promptly. The template and instructions provided to draw my split table top and each of the leaves were easy to use and understand. I mailed the completed materials and received the table pads very quickly. The table splits in the middle to allow insertion of up to 3 additional leaves. The table also has 2 drop leaves. That's 7 pads. All fit perfectly. I have used them on the table for family parties (not every day) and they're durable and built to last. I keep them in the box they arrived in to protect them when not in use. These are a worthwhile investment."
Recommended by93%of homeowners
Avatar for Chuck Huggins Inc
Chuck Huggins Inc
4.4(
25
)

Serving Grafton, WV and surrounding areas

In business since 1992

Free estimates

"I hired Chuck to help restore and paint my 110 year old home. This house was no small project as it is four stories high, includes 3 dormers, and had an ugly peeling paint job all over. Not only that but I wasn't sure what colors I wanted to use. I was very lucky to get Chuck and his crew. I've dealt with several contractors who do okay work but I could tell Chuck had a passion for helping me restore my home. He gave me several suggestions out of the Benjamin Moore catalogue of historical colors where I found a set I really liked. He had about a 4wk lead time until he was ready to start my home and during this he gave all sorts of tips on how to do some work myself and even bought me the supplies (Duramax paint, rollers, buckets, 5 in 1 tool) his crew would use so I could do some DIY. This helped me immensely and I got a good bit of work done. He showed up when he said he would begin the job and he and his crew worked tirelessly for nine days straight. This included a lot of scraping and prep work, some wood repair for damaged clapboards, painting my gutters and down spouts, and extensive caulking of the siding and around every window (20+ widows on the house). They put 50+ tubes of caulk into my home to seal it and they had to rent a lift to reach the dormers and top of the house. There were times when those guys worked 8am to 8pm. These guys spent a lot of time on the prep to get the surface right and a lot of time around each window to seal it properly. The end result was beautiful restored home. Chuck did extras for me as well including fixing my antique front door, added a new front and rear porch light that looked historical to match the house, reattached a fallen gutter, and added a long horizontal board along the bottom which not only protected some of the weaker clapboard but also was a good aesthetic choice. More over my house has a lot of trim and Chuck had the idea to paint some trim the body color so there were less lines overall and it really looks amazing. The bottom line is Chuck has been doing this for a long time and has a lot of experience and it really shows. His crew was solid and worked very hard. They didn't just do the minimum but added some nice details and extras and having someone that cares about their work goes a long way. They cleaned up nice and we had no disputes about labor or payment. I would personally rehire them for additional work and would also highly recommend them for future jobs."
Brochure 1 of 2
Brochure 2 of 2
Before
During
After

+11

Recommended by100%of homeowners
Avatar for Arkansas Wood Doors
Arkansas Wood Doors
5.0(
8
)

Serving Grafton, WV and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
Additional Photos
Additional Photos
.
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
...
Showing 1-10 of 83
Carpentry questions, answered by experts

The primary parts of a house that need framing during construction are floors, exterior walls, interior walls, and the roof. The framing in these areas provides the skeleton for adding other materials over the top. With walls, for example, contractors can hang drywall over the interior walls and siding over the outside of the exterior walls. Proper framing ensures a sturdy house that is built to last.

Yes, you will need a jack for a rim joist replacement. To prevent sagging and facilitate the removal of load-bearing wood, you’ll need to relieve the pressure from this joint before beginning work. 

Due to hydraulics and other specialized equipment, a sill plate and rim joist replacement are not typically a DIY project. Hiring a professional structural engineer and experienced contractors is the best approach to replacing rotted sill plates and rim joists.

When building a house, it is customary to use 16d nails that measure 3 1/2 inches in length to construct the frame. These nails are crucial in providing the necessary support and stability for structural elements like joists and studs, which ensures a sturdy framework.

If the bowing basement wall is less than 2 inches, steel or carbon fiber straps are the best solution. For bowing that is more than 2 inches, wall anchors are the most effective. A contractor can help you decide the best method of repair for your home's foundation and also address the root cause of the trouble.

While some highly experienced homeowners can frame a house independently, it is not advisable. You will need ample carpentry experience, a team of helpers, and professionals to sign off on your work to meet local building codes. For the safest outcome, we recommend buying or building a house with the guidance of professionals.

The Grafton, WV homeowners’ guide to carpentry services

From average costs to expert advice, get all the answers you need to get your job done.