Get matched with top pavers and hardscaping pros in Potosi, WI

It’s far more labor-intensive and expensive to demolish a concrete slab before laying down pavers. You’ll need a professional to break up and haul away the concrete, excavate underneath, bring in paver base or crushed gravel, and then level the area with leveling sand before laying the pavers. A new paver patio will cost around $1,000 to $2,000, which is more than laying pavers over a concrete patio, and takes longer to complete.

No, paver removal isn't needed to redo polymeric sand in a walkway or patio. Sand can be packed into existing joints as long as you're not dealing with intrusive tree roots or other severe paver problems that require you to pry up your pavers.

You can use regular sand as the base for your pavers and in between pavers to seal the joints. Many pros reach for polymeric sand, also known as all-purpose sand, because it has been sifted and washed to remove impurities. But you can easily level ground and fill gaps between pavers for a clean look using regular sand, sometimes at a lower cost.

An ideal driveway gradient is between 2% and 5%. Anything lower than 1% or higher than 15% can cause problems for your car or property. A driveway with less than a 1% slope increases your likelihood of flooding and water damage, while a driveway with a 15% grade or higher can be too steep for safe traveling.