Get matched with top drywall pros in Loyal, WI

Any level over 17% moisture should be replaced, as this could be a sign that the drywall is too compromised to be considered safe. A contractor or water restoration provider can come out and use a moisture meter to check the moisture level in your drywall. 

If after a visual inspection you’re still unsure about if your drywall is salvageable, a professional reading is the next best option.

If you’re installing new drywall, you may need to skim coat the drywall first for a smooth finish and to allow the primer to adhere to the wall. It’s only necessary if there are imperfections in your drywall due to issues with the studs or improper drywall installation. If you’re refreshing existing walls, you may want to skim coat if there are imperfections across the wall. As an alternative, you can repair your drywall and sand it for a smooth finish before painting.

Two of the biggest mistakes with drywalling are not measuring (and therefore buying the wrong amount of drywall) and trying to install drywall yourself. A sheet of drywall can weigh around 50 pounds, so it can be difficult to install without a pro or at least some experienced friends willing to help with a DIY installation. It can also get expensive if you don’t measure at least twice before buying the drywall sheets.

It’s a pretty good idea to have drywall corners, also called drywall beading. Drywall is a pretty brittle material and corners tend to be rubbed up against it often. Rather quickly, the edges will start crumbling and you’ll need to replace the entire panel, or add beads on top and repaint the wall. Drywall beads—which are inexpensive—provide long-term support for the drywall and protect your investment.