Top-rated sandblasting pros.

Get matched with top sandblasting pros in Linden, WI

Enter your zip and get matched with up to 5 pros

Need a pro for your sandblasting service project in Linden, WI?

Select your specific project to find the pro for you.

TRUSTED BY LINDEN, WI HOMEOWNERS

  • Average homeowner rating star icon5
    Average homeowner rating
  • Verified reviews icon13
    Verified sandblasting services reviews

Find Sandblasting pros in Linden

Avatar for Matthew Moss Painting
Matthew Moss Painting
3.7(
3
)
Exterior Surfaces - SandblastingExterior Surfaces - Sandblasting - For Business

Serving Linden, WI and surrounding areas

In business since 1990

Emergency services offered

Credit card accepted

Interior painting, exterior painting, Log Cabin Staining sheetrock repair, carpentry work, staining, concrete painting, handyman work, pressure washing, corn cobb and walnut shell blasting, cedar roof cleaning and stain & wood floor re-finishing. Additional phone number - (218) 851-4078

Additional Photos
Additional Photos
Before
After
Before

+24

Recommended by66%of homeowners
Sandblasting Services questions, answered by experts

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

Soda-blasting systems are slightly more expensive than sandblasting systems. To soda blast, you’ll need to spend a few hundred dollars for a blast hose and nozzle, a compressed air supply, a blast generator, a moisture decontamination system, and sodium bicarbonate media, a recurring cost because the powder is not reusable. To start with sandblasting, you will need to spend upwards of $30 for a blast pot, a blast gun, an air compressor, and sandblasting media, many of which are recyclable—further reducing the cost. The total cost for either will depend on the size of the system.

The cost of sandblasting depends on the scope of the project, the surface type, labor, and equipment required. Services typically cost between $50 and $80 per hour, though most professionals charge by surface area at a rate of $1.50 to $7 per square foot. Total project costs can range from $700 to $12,500, with an average homeowner spending around $3,200 to sandblast a 1,000-square-foot surface.

Sandblasting refers to the process of cleaning a surface using compressed air and aggregate. Soda blasting is the gentlest type of this method, but it differs from sandblasting that uses mineral or other aggregate, since sodium bicarbonate breaks apart more easily than other forms of blast media and, therefore, cannot be reused.

You can concrete can be done when it’s wet or dry. However, it’s safer when wet, as harmful dust and chemicals are present. Sanding it when dry is faster, but you’ll agitate more dust and chemicals, meaning you’ll need to be more careful.

The Linden, WI homeowners’ guide to sandblasting services

From average costs to expert advice, get all the answers you need to get your job done.