Is it worth getting a structural engineer?

• <div><p>If you’re building new construction or adding onto your existing home, hiring a structural engineer is not only worth it but it’s probably required by your local building department. Structural engineers will ensure you aren’t making your home unsafe in the building process, which is crucial from a safety perspective but also a legal one. It’s also worth hiring a structural engineer if you’re making changes to structural components, like removing a load-bearing wall.</p></div>

Get matched with top structural engineers in Howard, WI

Q: How can I tell if a home I purchased in an earthquake zone is bolted to the foundation?

• <div><p>Generally, you can tell if a home is bolted to the foundation by checking the foundation for plates. If you see that your foundational plates connect to wood or bolts protruding from them, this means that you have a bolted foundation. However, it's always wise to bring a home inspector in to confirm if your foundation is secure.</p></div>

Q: Is it worth getting a structural engineer?

• <div><p>If you&rsquo;re building new construction or adding onto your existing home, hiring a structural engineer is not only worth it but it&rsquo;s probably required by your local building department. Structural engineers will ensure you aren&rsquo;t making your home unsafe in the building process, which is crucial from a safety perspective but also a legal one. It&rsquo;s also worth hiring a structural engineer if you&rsquo;re making changes to structural components, like removing a load-bearing wall.</p></div>

Q: What are the disadvantages of a cathedral ceiling?

• <div><p>Cathedral ceilings make a statement in your home, but at the cost of your attic space. Normal attics are wide open, which allows warm air to move around and exit your home. Because of this, cathedral ceilings make your home less energy efficient and put your ceiling at risk of venting issues if you&rsquo;re not careful. They also reduce your attic storage space, potentially cause an echo, and even make it harder to change a light bulb. </p></div>

Q: How high can you build a single brick wall?

• <div><p>A freestanding brick wall that's only one brick thick can usually stand six to eight feet high. If you need a higher wall, it should be at least two bricks thick for adequate stability, and it might require a footing to support the added weight. Additionally, some areas have regulations and codes dictating how high a brick wall can be, so check with local code enforcers to ensure your proposed wall complies with any regulations.</p></div>

Q: How do professionals ensure durability in wall construction?

• <div><p>Through proper drainage solutions and compacting the foundation soil.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Howard, WI?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Howard, WI

*The Angi rating for Structural Engineering companies in Howard, WI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Howard, WI is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on May 25, 2026

Reviewed in May 2026
I highly recommend Armon Renovations. We hired Armon for a major second-story home addition, including structural framing, roofing, siding, HVAC, plumbing, electrical, drywall, tile, flooring, trim, and finish work. This was not a small or simple project, and Quincy and his team handled it with...
Armon Renovations
Request a quote
Reviewed in April 2024
Eliud is a highly skilled audio engineer, He is great with people and provides an amazing service
EANDE Systems
Request a quote
Reviewed in March 2024
I have been working with C.O contracting for years. They remodeled my basement and build a huge beautiful deck. Then did all my doors as nd finished my garage.
CO Contracting
Request a quote
Reviewed in January 2023
Had several large cedars that needed to be cleared from a crowded backyard. Several were leaning and presented a challenge as there are, in addition to the main cottage, other out-buildings. Jim and his crew worked for 3 days to clear and haul away everything without any damage to any...
Peninsula Tree & Landscape Service
Request a quote
Reviewed in May 2022
Shane was very knowledgeable and was able to put together my portable fireplace very efficiently. He also solved a structural issue with my couch that countless people before him could not fix. I would highly recommend!
Peterson Custom Solutions
Request a quote
Reviewed in October 2021
Bill Palomaki and his company Kitchen Pros did a complete remodel of our 20-year old, three story nice home. They successfully designed and built: 1.) new deck areas upgrading to Trex decking for our two deck areas; 2.) sauna and spa room, work shop, fuelwood storage area, fenced pet areas,...
Kitchen Pros
Request a quote
Reviewed in October 2019
They alerted me to structural problems they encountered that I followed up on and fixed. They did good work and were very timely.
All Weather Insulation
Request a quote
Reviewed in December 2015
<p>This was not an easy job and yet it went well. My house is nearly 100 years old and had some crazy carpentry and rotten wood. Nikos had no difficulty dealing with what these problems. He also came prepared to do the job - no continual running to home improvement stores because he could not...
Nikos Home Improvement LLC
Request a quote
Reviewed in September 2014
Excellent company, professional and knowledgable of product installed. The only company that actually took the time to analyze my needs and provide a solution based on the size and structure of my home. They did an analysis based on insulation, type and rating of windows, square footage etc. and...
BAY AREA SERVICES
Request a quote
Reviewed in September 2014
<p>Bill, the estimator. was very knowledgeable in this efforts to design a plan that met my needs and expectations and was able to keep within my budget.. Before I signed the contract agreement, Bill willingly made a second trip to my home to answer some additional questions and to explain a...
Specialty Design & Construction LLC
Request a quote

Find Structural engineers in Howard

Civil Fox Engineering, LLC

New to Angi

Serving Howard, WI and surrounding areas

In business since 2017

Free estimates

We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!

Request Quote

Structural Engineering questions, answered by experts

Generally, you can tell if a home is bolted to the foundation by checking the foundation for plates. If you see that your foundational plates connect to wood or bolts protruding from them, this means that you have a bolted foundation. However, it's always wise to bring a home inspector in to confirm if your foundation is secure.

If you’re building new construction or adding onto your existing home, hiring a structural engineer is not only worth it but it’s probably required by your local building department. Structural engineers will ensure you aren’t making your home unsafe in the building process, which is crucial from a safety perspective but also a legal one. It’s also worth hiring a structural engineer if you’re making changes to structural components, like removing a load-bearing wall.

Cathedral ceilings make a statement in your home, but at the cost of your attic space. Normal attics are wide open, which allows warm air to move around and exit your home. Because of this, cathedral ceilings make your home less energy efficient and put your ceiling at risk of venting issues if you’re not careful. They also reduce your attic storage space, potentially cause an echo, and even make it harder to change a light bulb.

A freestanding brick wall that's only one brick thick can usually stand six to eight feet high. If you need a higher wall, it should be at least two bricks thick for adequate stability, and it might require a footing to support the added weight. Additionally, some areas have regulations and codes dictating how high a brick wall can be, so check with local code enforcers to ensure your proposed wall complies with any regulations.

Through proper drainage solutions and compacting the foundation soil.

The Howard, WI homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Dan Simms
•
May 30, 2026May 30, 2026
How Much Does a Structural Engineer Cost to Hire? [2026 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total.
Timothy Moore
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install an LVL Beam? [2026 Data]
Looking to remove load-bearing walls and vertical supports to open up your living space? Learn about what affects the cost to install an LVL beam.
Dan Simms
•
May 30, 2026May 30, 2026
How Much Does Steel I-Beam Installation Cost? [2026 Data]
A new steel I-beam is more durable than a wooden one. Learn what factors can affect steel I-beam installation costs and how to budget for this project.
Rachel Hoffman
•
May 2, 2026May 2, 2026
Structural Steel Beam vs. Wood Beam: Which Is Right for You?
Structural steel and wood beams ensure your house is structurally sound. Learn the difference between steel and wood beams and how to choose the right one.
Rachel Hoffman
•
May 21, 2026May 21, 2026
What to Expect From a Structural Engineer Foundation Inspection
Identify potentially serious problems with your foundation with an inspection from a structural engineer.
Em Norton
•
May 5, 2026May 5, 2026
How to Hire a Structural Engineer: Complete Guide
It can be hard to choose the right pro for any job, but it matters. Learn how to hire a structural engineer who'll get the job done right from start to finish.