Get matched with top floor cleaners and waxers in Delavan, WI

Dust mops are the best option for tackling dirt and dust on marble floors. Vacuums aren’t a good idea as the brushes and beater rolls can scratch and damage your marble floors. If you must use a vacuum, make sure your vacuum has a setting for hard floors, and take care not to apply too much pressure when rolling the vacuum across your marble floor.

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

Wood floors should be polished every two to four months to maintain a shine and to keep them protected from daily wear and tear. More frequent maintenance includes dry mopping the floors daily and cleaning spills immediately, using a spray mop and cleaner weekly to remove any built up dirt or grime, and sanding and refinishing the floors every three to five years.

The cost to polish floors averages around $200 per room, but you could pay anywhere from $100 to $300. Some factors that influence the total cost of floor polishing include the following:

• Square footage of flooring

• Type of floor 

• Whether you need floor repairs done beforehand

• Whether or not you want professional floor cleaning done beforehand

Since square footage is the most significant cost factor, you might get a more accurate estimate by using the average cost per square foot for floor polishing, which is between $1.00 and $2.50.