Get matched with top dishwasher installation pros in Baraboo, WI

If your dishwasher isn’t draining, some common causes include a clogged drain filter, drain hose, or air gap. Also, if you have a garbage disposal, a clog in the disposal can back up your dishwasher since they share plumbing, as can a clog in your kitchen sink’s plumbing. A handy DIYer may be able to figure out how to unclog a dishwasher, but you may need to call in a plumber if you can’t locate and clear the clog yourself.

While the exact appearance of the filter will depend on your dishwasher brand, it often consists of a cylindrical or rectangular mesh or plastic component. The filter is located at the bottom of the dishwasher beneath the lower spray arm. It includes a combination of a coarse filter, which traps larger food particles, and a finer filter, which captures smaller debris. The filter assembly may be a single unit or a multi-part system that can be twisted or snapped out for cleaning.

To get rid of standing water in your dishwasher, first try activating the drain mechanism by pressing and holding the cancel button for at least three seconds. If that doesn’t work, you’ll need to do some troubleshooting to drain the standing water from the dishwasher. This will involve shutting off the power, then scooping out the water, cleaning the drain filter, and clearing the air gap. You’ll also want to run the garbage disposal and check the drain hose for clogs.

Water is sitting at the bottom of your dishwasher, likely because the filter is dirty with food debris or because the drain hose has a clog. If the water is still sticking around after following the steps above, it’s time to contact a local plumber.