4.7 
35 *The Angi rating for Wrought Iron Service companies in Longview, WA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Wrought Iron Service needs.
*The HomeAdvisor rating for Wrought Iron Service companies in Longview, WA is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Wrought Iron Service needs.
Last update on December 13, 2025
We are a family owned fencing company that installs and repairs all types of fencing and gates. We provide excellent customer service with that local small business feel and values. We aren't happy until our customers are.
We are a family owned fencing company that installs and repairs all types of fencing and gates. We provide excellent customer service with that local small business feel and values. We aren't happy until our customers are.
We are a Veteran owned General Contracting company that is proud of our Northwest roots. servicing the Portland, Oregon and surrounding area as well as the Vancouver, Washington and surrounding area, we are dedicated to always doing the right thing for our employees, customers and our planet. We understand that preserving our beautiful country requires a participation in the fight to protect it. Here at Vulcan Design & Construction, Inc. we believe in using our business as a tool to inspire and implement solutions to environmental concerns and to supporting our Veterans.
"It took forever to start. We were already upset with the company even before work started but we couldn?t back out. Their vehicles repeatedly blocking neighbors, material delivery blocking very important access to our garage, design change to stairway suggested by their designer is a constant headache. The deck wasn?t the right size. Project manager rarely supervised work and was repeatedly done incorrectly. They even had to tear off the surface and start over a couple times. They used wood that was already splintered. They kept adding money to the final total and expected payment immediately but when they owed us they had no record of the proper calculations. The backyard was a muddy mess because they started during the rainy season even though that?s when the project should?ve been finished according to their timeline. We signed the contract in May. Unhappy with the current state. The permit is still open and they ignore contact from the city. "
Julie L on November 2025
We are a Veteran owned General Contracting company that is proud of our Northwest roots. servicing the Portland, Oregon and surrounding area as well as the Vancouver, Washington and surrounding area, we are dedicated to always doing the right thing for our employees, customers and our planet. We understand that preserving our beautiful country requires a participation in the fight to protect it. Here at Vulcan Design & Construction, Inc. we believe in using our business as a tool to inspire and implement solutions to environmental concerns and to supporting our Veterans.
"It took forever to start. We were already upset with the company even before work started but we couldn?t back out. Their vehicles repeatedly blocking neighbors, material delivery blocking very important access to our garage, design change to stairway suggested by their designer is a constant headache. The deck wasn?t the right size. Project manager rarely supervised work and was repeatedly done incorrectly. They even had to tear off the surface and start over a couple times. They used wood that was already splintered. They kept adding money to the final total and expected payment immediately but when they owed us they had no record of the proper calculations. The backyard was a muddy mess because they started during the rainy season even though that?s when the project should?ve been finished according to their timeline. We signed the contract in May. Unhappy with the current state. The permit is still open and they ignore contact from the city. "
Julie L on November 2025
Everything with a metal
Everything with a metal
NW Iron Works, Inc is in the business of providing a solution for all your railing needs. Our passion is turning iron and metal products into treasured art work that define your personal style and enhance the design of your home. We offer a vast selection of material, wrought iron, stainless steel, forged steel and aluminum. Each railing is customized by our seasoned skilled artisans we are dedicated to precisely design and fabricate each product to meet our clients distinct need.
NW Iron Works, Inc is in the business of providing a solution for all your railing needs. Our passion is turning iron and metal products into treasured art work that define your personal style and enhance the design of your home. We offer a vast selection of material, wrought iron, stainless steel, forged steel and aluminum. Each railing is customized by our seasoned skilled artisans we are dedicated to precisely design and fabricate each product to meet our clients distinct need.
Disabled Veteran owned, ECO friendly business. Paint stripping, Rust Removal, cars, trucks, boats, furniture, buildings, concrete, brick, masonry surfaces.
Disabled Veteran owned, ECO friendly business. Paint stripping, Rust Removal, cars, trucks, boats, furniture, buildings, concrete, brick, masonry surfaces.
I value all of my customers & follow all of my projects from start to completion to ensure rigid quality standards, I believe in doing things right the first time. I generally handle projects on my own, sometimes with a helper. When I have a larger project, I have a solid network of contractors that I sub-contract with. I generally request approximately 50% down payment on most jobs for new customers, but that can vary depending on project scope, materials, etc.., remainder + tax due upon completion. At this point I accept cash or check. I estimate projects, or charge time & materials. I value communication with my customers to ensure everyone's needs are being met & we're all on the same page. I have a $200 minimum charge which covers the first 2 hours on your job, then it's $50/hr from there on. The minimum charge ensures overhead is met on any job. Crawl space & attic work incur extra charges. Welding & metal fab is billed at a higher rate, depending on the project. I guarantee all of my work & proudly stand behind my ethics & performance. You can always find someone cheaper, but why pay for something twice? Get it done by a qualified person, done right the first time.
I value all of my customers & follow all of my projects from start to completion to ensure rigid quality standards, I believe in doing things right the first time. I generally handle projects on my own, sometimes with a helper. When I have a larger project, I have a solid network of contractors that I sub-contract with. I generally request approximately 50% down payment on most jobs for new customers, but that can vary depending on project scope, materials, etc.., remainder + tax due upon completion. At this point I accept cash or check. I estimate projects, or charge time & materials. I value communication with my customers to ensure everyone's needs are being met & we're all on the same page. I have a $200 minimum charge which covers the first 2 hours on your job, then it's $50/hr from there on. The minimum charge ensures overhead is met on any job. Crawl space & attic work incur extra charges. Welding & metal fab is billed at a higher rate, depending on the project. I guarantee all of my work & proudly stand behind my ethics & performance. You can always find someone cheaper, but why pay for something twice? Get it done by a qualified person, done right the first time.
I AM A LICENSED, BONDED, AND INSURED GENERAL CONTRACTOR. I SPECIALIZE IN (MOBILE REPAIR) FABRICATION AND INSTALLATION OF BURGLAR BARS, STAIRS AND HAND RAILS, HOME REPAIR. I CAN BUILD INSTALL AND REPAIR ANY THING YOU NEED.I SPECIALIZE IN FABRICATION AND INSTALLATION OF BURGLAR BARS, STAIRS AND HAND RAILS, HOME REPAIR. I CAN BUILD INSTALL AND REPAIR ANY THING YOU NEED. PLEASE CONTACT ME AT 503-960-6938. FEEL FREE TO CHECK OUT MY WEB SITE TO BETTER FACILITATE YOU. THANK YOU GRANT. http: //www.candgmetalfab.com CCB#200210
I AM A LICENSED, BONDED, AND INSURED GENERAL CONTRACTOR. I SPECIALIZE IN (MOBILE REPAIR) FABRICATION AND INSTALLATION OF BURGLAR BARS, STAIRS AND HAND RAILS, HOME REPAIR. I CAN BUILD INSTALL AND REPAIR ANY THING YOU NEED.I SPECIALIZE IN FABRICATION AND INSTALLATION OF BURGLAR BARS, STAIRS AND HAND RAILS, HOME REPAIR. I CAN BUILD INSTALL AND REPAIR ANY THING YOU NEED. PLEASE CONTACT ME AT 503-960-6938. FEEL FREE TO CHECK OUT MY WEB SITE TO BETTER FACILITATE YOU. THANK YOU GRANT. http: //www.candgmetalfab.com CCB#200210
Aerowelding and Fab., LLC was founded by Troy & Julia Thompson, in 2010. We relocated to Goldendale Washington in 2020. Our company mission is to provide top quality, specialty mobile welding and fabrication for our local and out of state clients. Whether you need mobile welding on the spot or have a custom fabrication project, we can deliver right to your door. Our experience comes from working on a wide verity of different Industries and products such as: Food & Beverage Processing Plants, Winery's, Brewery's, Cruise Ships, Boats, Aircraft and Blimps. Other projects include but are not limited to: Sanitary Tanks, Shaker Table, Aircraft Fabric, Fuel Tanks, Exhaust Systems, Trailer Repair, Metal Work, Farm Equipment & Suspension Systems.
Aerowelding and Fab., LLC was founded by Troy & Julia Thompson, in 2010. We relocated to Goldendale Washington in 2020. Our company mission is to provide top quality, specialty mobile welding and fabrication for our local and out of state clients. Whether you need mobile welding on the spot or have a custom fabrication project, we can deliver right to your door. Our experience comes from working on a wide verity of different Industries and products such as: Food & Beverage Processing Plants, Winery's, Brewery's, Cruise Ships, Boats, Aircraft and Blimps. Other projects include but are not limited to: Sanitary Tanks, Shaker Table, Aircraft Fabric, Fuel Tanks, Exhaust Systems, Trailer Repair, Metal Work, Farm Equipment & Suspension Systems.
Fence installations
"They did an excellent job. They were prompt at returning our calls and getting a bid to us. They did all work as specified. They did a great job. Cleaned up the work space after. We were very pleased with their service. We would refer them to other people."
Erin A on November 2018
Fence installations
"They did an excellent job. They were prompt at returning our calls and getting a bid to us. They did all work as specified. They did a great job. Cleaned up the work space after. We were very pleased with their service. We would refer them to other people."
Erin A on November 2018
We are a company that is very diverse in our services, we offer in house financing, free estimates, and a multitude of in house services that other companies do not provide.
We are a company that is very diverse in our services, we offer in house financing, free estimates, and a multitude of in house services that other companies do not provide.
As with any project or material, installing wrought iron fencing has advantages and disadvantages. Some pros and cons of this fence material include:
Pros
Long lifespan with proper maintenance
Very durable
Aesthetically pleasing
Functional as well as decorative
Cons
Requires regular maintenance and cleaning
Expensive compared to other fence materials
Limited privacy
Wrought iron fencing costs about $3,100, on average, ranging from $470 to $10,000 or more, depending on the type of fencing, the length, and any custom design work. You should also consider additional cost factors, such as metal thickness, labor costs in your location, permits, old fence removal, tree or bush removal, land grading, gates, and columns. Wrought iron fence materials cost around $1,925 to $3,500 per project, or $25 to $35 per linear foot.
Installing a wrought iron railing costs about $2,600 on average, depending on the size and your location. Costs range from $700 to $4,600 for most projects. Typically, wrought iron railings cost about $50 to $120 per linear foot, not including labor. Additional cost factors include the material and component costs and any custom work. Different wrought iron railing finishes include:
Plain black: $50–$70 per linear foot
Galvanized wrought iron: $60–$90 per linear foot
Ornamental wrought iron: $60–$120 per linear foot
A wrought iron fence is worth it if the material suits your home’s needs and the cost fits within your budget. However, wrought iron is not the best choice if you’re looking for a fence that increases privacy. However, if you want a fence and a security gate that complements your brick or stone home with a classy, timeless, and elegant look, wrought iron fencing is a good option. As far as the longevity of wrought iron fencing compared to other materials, wrought iron wins almost every time.
A high-quality wrought iron fence should last a lifetime or even centuries. However, making your wrought iron last as long as possible will require regular maintenance as the material is susceptible to corrosion and rust. Maintenance involves cleaning the fence with soapy water every six months and applying a new coat of paint yearly. While you’re cleaning your wrought iron fence, scrub away any rust or corrosion to maintain its look and viability.
From average costs to expert advice, get all the answers you need to get your job done.
Discover commercial sign installation cost details, including average prices, key cost factors, and tips to save on your next signage project.
