Get matched with top generator install pros in Chelan, WA

Generator size requirements vary wildly among properties, but typical generator sizes are listed below based on home square footage:

• 1,000 sq ft: 6–9 kW

• 1,500 sq ft: 7–10 kW

• 2,000 sq ft: 10–14kW

• 2,500 sq ft: 12–16kW

• 3,000 sq ft: 16–20kW+

Unfortunately, home square footage isn’t always a good indicator of generator size requirements. Instead, you should call in a professional to discuss which items in your home you’d like to run via your generator. They can calculate peak and average consumption for those items and then size your generator appropriately for optimal performance.

When maintained properly, a whole-house generator can last up to 20 years. Costs to maintain and repair generators vary by location and type of generator, but you can expect to pay about $150 to $300 per year for annual generator maintenance checks. An experienced generator service technician will inspect your generator’s engine filter, starting mechanism, fuel, lubrication, and coolant levels to keep your generator in good working condition for as long as possible.

To reduce AC startup power for a whole-house generator, install a soft start kit or hard start capacitor, which lowers the initial surge by gradually ramping up the compressor. Using a smart load manager can also help by staggering startup loads, preventing a system overload and future costly repairs.

As a safety measure, you should always turn off the main breaker while operating your generator’s backup breaker. In addition, you should also switch off all appliance breakers so you don't have a power surge when the main breaker turns back on. And finally, turning off the main breaker prevents back-feeding, which endangers utility workers with the risk of electrocution. Back-feeding could also destroy the electrical circuits of your neighbors if they use the same power network.