Best stone countertop pros near Whitingham, VT

If you're looking to break up a stone slab or some landscaping stone, the process is very similar to breaking up a boulder, and may in fact be easier because it is easier to access and not as deeply buried into the ground.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.

The best way to save money on countertop installation is to choose an affordable material. For example, if you have a busy kitchen and need durability, choose a more affordable but lasting material like granite countertops. Likewise, if you don't use your countertops often, you can use a softer material that costs less than more sturdy ones. 

Another way to cut costs is to remove and dispose of the existing countertops yourself, if possible. That way, countertop installers can get straight to placing the new feature, reducing labor costs.

Fortunately, there are many types of heatproof countertops. Granite, quartzite, concrete, and stainless steel are all fiery contenders. These surfaces work best in busy kitchens where hot pots, pans, and baking sheets are part of the daily routine. Plus, their durability means you get a long-lasting work surface that won’t flinch at a bit of heat or heavy use. However, many stone and concrete counters require a sealer, which is typically not heatproof.