Best driveway gate pros near Whitingham, VT

Generally, the standard 10- to 12-inch-long and 1- to 1.5-inch-diameter gate springs will work. However, if you have an especially wide, thick, or heavy garden gate, you may need to opt for a longer, broader—and pricier—model to ensure secure closure and good longevity. These typically range between 12 and 16 inches long and are over 1.5 inches in diameter.

It does matter which way a hinge is installed because it’s possible to install a hinge backward. The hinge pin should face the direction in which the door will swing, making the pin visible. Exterior doors that swing outward need a security hinge with an Allen set screw in the center to prevent someone from removing the hinge from the outside and accessing the home or business.

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.

For homeowners concerned about security, an electric gate may offer peace of mind. Electric gates will require a code or remote to open, so you don’t have to worry about young children getting out of the yard or someone breaking onto your property by simply swinging open the gate. But because it needs power to operate, installing an electric gate will be more complex and expensive.