Get matched with top drywall pros in Island Pond, VT

You should wait at least 24 hours between each coat of drywall mud before sanding and adding another coat. This ensures the mud dries completely, although drying time depends on temperature, humidity, and the type of compound used. Lightweight muds dry faster, while heavier all-purpose compounds take longer. Always check for firmness and dryness before sanding or applying the next layer.

Yes, it is possible to DIY install drywall, but it is a deceptively complicated process that can be quite frustrating if you don’t have experience. Prepare to cut and screw drywall, leave the proper gap distance for any seams, never leave the end of a piece of drywall hanging off of a stud, and cut out around electrical boxes and switches. Plus, getting the drywall to look good is challenging, especially when taping and spackling. That’s why it’s usually a better idea to hire a professional drywall installer to ensure high-quality results.

In most cases, no, you won’t need a permit to replace drywall. If you’re changing the floorplan of your home by adding or removing walls during the drywall project, then you might need a permit, but replacement or repairs usually doesn’t require a permit. Your drywall professional should be able to confirm whether or not a permit is required for your project. If it is, it’s likely to add between $50 and $150 to your total cost. Keep in mind that you will need permits if you plan to install new electrical wiring or plumbing lines behind your new drywall.

You should do a little bit of sanding between adding coats of mud. Knock down any ridges or significantly imperfect areas through sanding, which should help you apply the next coat of mud smoothly. If your first coat of mud is pretty smooth after it dries, a quick sanding is all you’ll need. Don’t forget to wipe away any dust after each sanding process.