Get matched with top drywall pros in Concord, VT

Yes, any parts of drywall that are wet or overly moist will need to be replaced. Drywall is intended to be dry (it’s in the name, after all.), as excess moisture can lead to mold and mildew and eventually corrode your home’s foundational building pieces. Do regular inspections in your home to make sure all your plumbing is intact and in good condition—this will go a long way toward preventing leaks.

Whether you can reuse a drywall anchor or not depends on the type. Plastic expansion anchors and plastic self-drilling anchors, which expand once screwed into the wall, are single-use only. You can't straighten and reuse them after removing them from the wall.

Metal toggle bolts can be reused, provided you can successfully remove the toggle from behind the wall. Once you remove the bolt, the toggle often falls down and can be difficult to retrieve without removing the drywall.

Drywall installation costs around $2,000 on average, but some projects cost as low as $400, while larger or more complicated installations can cost $6,000 or more. The most important cost factor is the size of the room or area, as many contractors charge on a per-square-foot basis. You should also consider the complexity of the installation. If you have large, flat walls with few wall openings, you’ll pay less than if you have multiple windows and doors to cut around, corners, or curved walls.

Drywall mud should be left to dry for at least 24 hours before sanding, though drying time depends on the thickness of the application, humidity, and room temperature. Thicker layers or projects done in high humidity may require 48 hours or more of drying time. You’ll know the mud is ready when it feels completely dry and appears light in color throughout. Sanding too early can cause smudging or gouges, so patience is key for a smooth, professional-looking finish.