Top-rated carpenters.

Get matched with top carpenters in Barnet, VT

Enter your zip and get matched with up to 5 pros

Find Carpenters in Barnet

Avatar for Fresh Start Remodeling and Repair, LLC
Fresh Start Remodeling and Repair, LLC
5.0(
10
)

Serving Barnet, VT and surrounding areas

Approved

Super Service Award Winner

In business since 2010

Free estimates

Credit card accepted

"We hired them to replace the floor in our living, kitchen, dining room, and laundry room. They worked with us to decide what kind/color flooring we wanted, did it in the time frame indicated, cleaned while they worked, were fun to be around, and came in UNDER estimate. I think the most important part is he returns phone calls/texts! Some things came up so it messed up the timeline we had (no big deal) and he let us know ahead of time. If you work (or try to) with any sort of contractor, hearing from them is the biggest challenge. The pics attached are what they faced when they pulled the carpet and the other pic is mid-dining room reno. Highly recommend - as much as I hate to, they may not be available for our next project if people hear how great they are!"
Response time1 day
20 neighbors recently requested a quote
Recommended by55%of homeowners
Avatar for Tejada's Remodeling Inc
Tejada's Remodeling Inc
4.8(
30
)

Serving Barnet, VT and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Warranties offered

"I was very impressed working with this company. Communication was superb right off the bat. We went over the job in detail, and it was completed perfectly. The company is very professional and pays attention to every detail. The price was good too! They also cleaned the area thoroughly and my property looks exquisite. Hire this company with confidence. Thank you!"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+6

Response time1 day
8 neighbors recently requested a quote
Recommended by82%of homeowners
Avatar for Exteriors & Renovations
Exteriors & Renovations
4.4(
19
)

Serving Barnet, VT and surrounding areas

Approved

In business since 2016

Free estimates

Warranties offered

"I was most impressed with the cost. The work was good, nothing special but everything was done properly and looks good after some adjustments. Very responsive project manager !"
Another beautiful new standing seam metal
New standing seam metal
New standing seam metal
Another beautiful standing seam metal
Response time1 day
Response rate87%
107 neighbors recently requested a quote
Avatar for Sentri Homes
Sentri Homes
2.3(
21
)

Serving Barnet, VT and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."
29 neighbors recently requested a quote
Cadreact Carpentry
5.0(
4
)

Serving Barnet, VT and surrounding areas

In business since 1999

Free estimates

"Craig is spectacular! We have used him for multiple projects around the house. Bathroom remodels, drywall work, siding, windows, our patio, radiant floor heating, and a whole lot of other things. He is always the first person I call when I need something done around the home and if some one I know says they need a contractor I always tell them to call Craig."
Recommended by100%of homeowners
Avatar for Arkansas Wood Doors
Arkansas Wood Doors
5.0(
8
)

Serving Barnet, VT and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
Additional Photos
Additional Photos
.
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
Avatar for Homemade Design
Homemade Design
3.7(
322
)

Serving Barnet, VT and surrounding areas

In business since 2006

Credit card accepted

"The designers were very nice.  However, they only recommended/carried a litmit number of suppliers - few of which were in Indy.  The suppliers they carreid were also very expensive.  Even though I sent pictures, I found that I needed a designer that could come to the house and help find local suppliers for paints and material."
Pennsylvania Master Bathroom
Boston Small Condo Kitchen
California Client Saves with HMD Designer Discounts
Recommended by54%of homeowners
Avatar for Vermont Precision Contracting
Vermont Precision Contracting
4.9(
8
)

Serving Barnet, VT and surrounding areas

Free estimates

Emergency services offered

Credit card accepted

"They did an excellent job, were professional, very knowledgeable, and very transparent with pricing. They were young and go-getters. I can't say enough about them and I would highly recommend them. I plan on using them for any future projects."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+17

Recommended by100%of homeowners
Avatar for Dynasty Decking, LLC
Dynasty Decking, LLC
5.0(
3
)

Serving Barnet, VT and surrounding areas

Free estimates

"Dynasty Decking has my vote for best construction team. They are not only honest and trustworthy but kind and understanding. They worked with my budget and troubleshooted with me so that I got the best possible results. I recommend them to all my friends and family. They’re even certified through the state unlike a few of the other people who gave me outrageous quotes."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Recommended by100%of homeowners
...
Showing 1-10 of 84
Carpentry questions, answered by experts

An A-frame home can be cheaper to build than a traditional house, but that is not always a given. Prices can be fairly similar in some cases, depending on the location, design, and necessary site preparation. Costs for an A-frame typically run between $100 to $200 per square foot, which is comparable to the cost of a traditional home. The cost of an A-frame can come in under those numbers if you opt for a prefabricated kit.

When hanging a door frame, it’s recommended that you use screws, not nails. Screws are more secure, easier to tighten, and easier to remove if you need to adjust the frame. On average, the cost to replace a door frame is about $400, but you can save on labor costs if you’re confident in your ability to DIY the project. 

Removing a load-bearing wall affects the structural integrity of your home, so you’ll need a permit before starting the work. Building codes vary by municipality, and obtaining a permit and having the work inspected after completion will ensure you’re in compliance with all applicable regulations.

If you remove a load-bearing wall to create an entrance to a carport or covered patio, you can expect to pay between $3,200 and $9,500, with an average cost of $6,400. Factors such as the type of addition and if that area needs additional work will add to the price.

Yes, you will need a jack for a rim joist replacement. To prevent sagging and facilitate the removal of load-bearing wood, you’ll need to relieve the pressure from this joint before beginning work. 

Due to hydraulics and other specialized equipment, a sill plate and rim joist replacement are not typically a DIY project. Hiring a professional structural engineer and experienced contractors is the best approach to replacing rotted sill plates and rim joists.

The Barnet, VT homeowners’ guide to carpentry services

From average costs to expert advice, get all the answers you need to get your job done.

What do you need done? We’ll find top pros.
  • 🌱 "Mow a small front yard"
  • 🛠 "Fix a leaking pipe under the sink"
  • 🏠 "Repair shingles on an asphalt roof"