Best pressure washers near Addison, VT

Yes, it is highly recommended to wash a house's exterior before painting to ensure the best results. Cleaning the surface removes dirt, dust, grime, mold, mildew, and old paint, which allows the new paint to adhere properly and results in a smoother, long-lasting finish. Failing to clean can lead to poor adhesion, peeling, and an uneven appearance. Pressure washing is an efficient method for this, but be cautious not to use excessive pressure that could damage siding or wood. For materials like vinyl or stucco, soft washing might be a better option. After washing, allow sufficient drying time, such as three to four days, before painting to prevent trapping moisture, which can cause blistering or peeling.

You should always power wash your driveway before applying a sealant. At any given time, your driveway could be covered with algae and moss, tire residue, oil and rust stains, and any combination of leaves, twigs, and dirt. If you skip power washing, you’ll be trapping the dirt and grime beneath the sealant and lowering its chance of cementing itself to your driveway. While you can expect the cost to pressure wash your driveway to average between $100 and $350, the few hundred dollars beats an unattractive driveway or paying extra to reapply your driveway sealer.

This answer is a bit tricky because experts say both. You should apply your cleaning solution from bottom to top, but rinse from top to bottom to avoid streaking. When it comes to multi-story houses, you’ll want to start at the top floor and work your way down, but follow the above instructions for each level as if it were an independent structure, rather than washing the whole house as one unit.

While power washing isn't a requirement before you stain a fence, it can make the job much easier and faster while reducing manual labor requirements. The stain will not work if the wood is full of dirt and dust, so power washing, sometimes called pressure washing, is a fast and effective way to prepare the wood for staining. Remember that you need to stain or repaint relatively soon after the wood has dried so that there isn’t time for dust and dirt to build up again.