Top-rated lead testing and removal specialists.

Get matched with top lead testing and removal specialists in Warsaw, VA

Enter your zip and get matched with up to 5 pros

Need a pro for your lead testing and removal project in Warsaw, VA?

Select your specific project to find the pro for you.

Find Lead testing and removal specialists in Warsaw

Avatar for CSI Home and Commercial Services
CSI Home and Commercial Services
4.6(
80
)
Toxic Lead - AbatementToxic Lead - Testing

Serving Warsaw, VA and surrounding areas

In business since 1995

Free estimates

Credit card accepted

"CSI was flexible and was able to schedule a home inspector the day after I got a bid accepted on a house. The inspector, Patrick, showed up on time and the inspection took about 4 hours. Patrick was responsive to any questions I had by email or live during the inspection. My one recommendation is that I requested a pest, mold, radon, and home inspection. It would be a better heads up if they explained that they sometimes outsource the radon inspection depending on availability of radon inspectors. Also, they can explain a bit more for new home buyers what is involved with a mold inspection. Patrick ended up just eyeing whether he spotted any mold. Because he did not see any mold, we did not have to pay extra for mold samples."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+5

Recommended by97%of homeowners
Lead Testing and Removal questions, answered by experts

Through air sampling devices and surface swabs in key areas of concern.

Exterior paint contains a higher level of VOCs, which can be dangerous if you’re exposed to it for a long period of time. The good news is that paint’s toxicity reduces significantly once fully dried and cured. Do not keep open exterior paint cans in your home, basement, or garage, exposing your household to harmful chemicals over time.

Lead removal services typically cost between $1,000 and $5,000, depending on the extent of lead presence, the property size, and the complexity of the abatement process.

Several different measurements may be used to determine the amount of lead in water. The most common unit of measurement is micrograms per liter (µg/L), which is the same as parts per billion. Another measurement is milligrams per liter (mg/L), which is the same as parts per million.

When a surface that contains lead dust is disturbed, the dust can float about in the air for roughly an hour before settling again. Since you cannot see the dust, it is important always to wear protective gear when working with any materials that may contain lead paint and to keep children, pets, and others away from the area for as long as possible

The Warsaw, VA homeowners’ guide to lead testing and removal services

From average costs to expert advice, get all the answers you need to get your job done.