Get matched with top cabinet makers in Onancock, VA

Typically, a medicine cabinet should be installed about 60 to 72 inches above the floor. This height ensures that it's easily accessible for most individuals while allowing for proper visibility and convenience. However, the ideal height may vary based on individual preferences and the average eye level of the users in your household.

It’s best to stick with lightweight cabinets, such as medium-density fiberboard, if you don’t have a wall stud to secure them to. Unless you’re attaching the cabinet to a flat board attached to wall studs, it’s best not to risk it with heavy cabinetry or contents. Solid wood cabinets and heavy dishware should be avoided if you cannot secure the cabinet to a wall stud. Either way, always check the weight on your wall anchors and be sure not to exceed it.

It’s much less expensive to build your own garage shelves, and you’ll still get stable, long-lasting, and sharp-looking shelves. Garage storage systems cost between $615 and $2,635, with the national average of about $1,455. Building DIY garage shelves typically costs less than $500, and the quality of a DIY garage shelving unit will almost always be higher than what you could buy premade for the equivalent price.

The 1/3 rule is a design guideline used by interior designers and cabinet installers to select appropriately sized pulls for cabinets and drawers. The rule suggests that for a balanced and cohesive look, a cabinet pull should be approximately one-third the height of the cabinet door or one-third the width of the drawer face. This guideline helps create a symmetrical appearance because the human eye tends to follow the length of the pull across the cabinet face.

While the 1/3 rule is a helpful starting point, it is not the only option. If a measurement falls between available pull sizes, it's generally best to size up. For an ultra-contemporary aesthetic, you can also opt for full-width pulls that span the entire drawer.