Get matched with top countertop and backsplash pros in Lancaster, VA

Concrete countertops usually cost more than granite. The average overall cost to install concrete countertops is $50 to $150 per square foot. Granite countertop costs average between $40 and $50 per square foot. While concrete materials might be cheaper than slabs of granite, the labor costs are considerably higher as it takes more time, specialized equipment and skill to form customized concrete countertops.

When installing an undermount kitchen sink in a granite countertop, use 100% silicone to secure the basin. If you’re worried your sink is too heavy, speak with a countertop professional about how to adhere the sink to the countertop without worrying about issues down the road. Sagging undermount sinks can be a common plumbing problem if they’re not properly adhered, so always make sure you’re using a high-quality material.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.

Yes, Corian® and other solid surface countertops can be cut with standard woodworking tools like a circular saw or a jigsaw, but using the correct blade is crucial for the best results.

The recommended blade is a tungsten carbide-tipped blade, often called a solid-surface planer or triple chip grind blade. This type of blade is hard enough to cut through the material effectively. For a jigsaw, a fine-tooth down-cutting blade should be used.

It is important to note that a diamond blade is not necessary. Diamond blades are designed for harder materials like natural stone, concrete, or brick, and Corian is not a natural stone.

Using blades designed for wood is not recommended as they can cause microfractures that weaken the countertop's edges. While a tungsten carbide blade provides a much cleaner cut, the resulting edge will still be rough and must be sanded and smoothed to prevent microfractures from developing over time.