We take pride in handling the vast majority of work in house. The few items we may subcontract out are only to contractors we have used numerous times before and know perform at the highest standard. We are just beginning to dabble into financing.
I had contacted five other contractors before finding Barry and his stellar team. Two contractors were no shows and three showed but did not return with an estimate, even after several calls to them. I knew that the job would be challenging and would require a skilled architect and contractor. While where the pool sat was level ground, the ground surrounding it was not, it provided very difficult elevation changes. Additionally the deck had to marry to the house and Florida room elevations, which were also different. I also wanted the deck boards to carry over the pool edge all around the pool - an oval pool within a disparate geometric deck (probably why the other contractors ran away)
Barry arrived on time to provide an estimate, made some initial measurements, addressed material requirements, number of gates, steps, access points, etc. Provided a rough order of magnitude based on estimated square footage and asked if he could have his architect come out. I agreed and he said he would get back to me. Barry returned the following day with the architect, three days after that we had plans and a contract. Two days after that we had a permit, then 3 days later the material was delivered and with it a crew that I can say based on experience before and after the job is in all likely hood the best in the area (not my first contracting rodeo in Virginia Beach). Barry's "A" team is compromised of his son Chase, Fanz Roman and Gilder Roman. The crew was polite, attentive and most importantly WORKED from the time they arrived till the time they departed.
I know Barry had other jobs ongoing in parallel with mine; but Barry showed up regularly to both work alongside his crew and provide supervision for the challenging compound miters (though little to no supervision was needed-they all have mad carpentry skills!). Barry did have to absent himself for a job up north for a day or two; but the team never missed a beat and Barry called me to ensure I was having no issues. One of Barry's attributes that I really appreciated, other than his knowledge and experience, was his responsiveness, whether through email or phone he always answered immediately. I also appreciated that we worked as a team. If there was an issue it was resolved quickly. As an example, it became apparent that the planned deck pattern would not work, though it looked good on paper. Fanz and Gilder designed a solution, laid it out for approval, The result was perfect!
I have two more projects I am saving for. I am not even going to waste my time chasing after other contractors. Barry's price is within the market, his work ethic exemplary and he delivers on his promise, the jobs will be his. I want it right, so I will wait for his availability.
We are your most affordable "one stop shop" contracting company that provides all of your home maintenance/construction needs. We work with businesses and homeowners providing quality workmanship at reasonable prices. Additional DBA - Gabriel & Gail Better Business LLC & Gabriel and Gail.
K&M Quality Carpentry, LLC is a privately owned business with more than 20 years in the\nresidential construction and remodeling business. Have been doing business VA, MD, and the\nDistrict of Columbia since 1994.\n• Contractor\nAs your Contractor, we focus on all the project details to ensure a satisfactory outcome\nfor you. We ensure that all permits for each phase of the project meet or exceed state and\nmunicipal building codes.\nK&M Quality Carpentry, LLC serves as a sub-contractor for many General Contractors\nin the area.\nWe pride ourselves on all the projects we undertake and focus on delivering quality and\nsatisfaction.\n• Repair and upgrades\nNew Customs Homes\nRoofing Flooring\nSiding Doors\nWindows Decks\nPorches Int/Ext Painting\nInsulating Garages\nGazebos Saunas\nCustom Cabinetry Custom Trim\nWood Ceilings Additions\nRemodeling (specializing in Kitchens & Bathrooms)\nIf you have a project or repair that doesn't appear on this list, contact me and I’ll try to meet your\nneeds or refer you to someone who specializes that particular area.\nLicensed (Class A) & Fully Insured
Our mission at Hampton Enterprise LLC is to provide clients with superior customer service, quality work and speedy service in all aspects of their home improvement needs. Licensed, insured and trusted since 1989; come discover the Hampton difference today!\n\nWe specialize in the installation and repair of Windows, Doors, Flooring, Sinks, Bathtubs, Showers, Sprinkler Systems and much more. We also offer Interior and Exterior Home Painting, Custom Welding Fabrication and Carpentry.Localy in your area just call and i will call back with a local number thank you . from James Hampton\n\nAL.Dothan 334-648-3817,\nAL Birmingham 334-648-3817,\nAL Huntsville 334-648-3817,\nAL Mobile 334-648-3817,\nAL Tuscaloosa 334-648-3817,\nAL Montgomery 334-578-4761,\nAR Little Rock 334-648-3817,\nAZ Phoenix 334-648-3817,\nCA LosAngeles/Sacramento 334-648-3817,\nCO Denver/Colorado Springs 334-648-3817,\nCT Hartford 334-648-3817,\nDE Dover 334-648-3817,\nFL Tallahassee 334-648-3817,\nFL Cape Canaveral/ Cocoa 334-648-3817,\nFL. Destin 334-648-3817,\nFL Gainsville 334-648-3817\nFl Jacksonville 334-648-3817,\nFL Orlando 334-648-3817,\nFL Panama City 334-648-3817,\nFL Tampa 334-648-3817,\nFL Miami 334-648-3817,\nGA Atlanta 334-648-3817,\nGA Albany 334-648-3817,\nGA Augusta 334-648-3817,\nGA Columbus 334-648-3817,\nGA Macon 334-648-3817,\nGA Valdosta 334-648-3817,\nIA Des Moines 334-648-3817,\nID Boise 334-648-3817,\nIL Chicago/Springfield 334-648-3817,\nIN Indianapolis 334-648-3817,\nKS Levenworth/Topeka 334-648-3817,\nKY Frankfort 334-648-3817,\nLA New orleans/Baton Rouge 334-648-3817,\nMA Boston 334-648-3817,\nMD Annapolis 334-648-3817,\nME Augusta 334-648-3817,\nMI Detroit/Lansing 334-648-3817,\nMN Saint Paul 334-648-3817,\nMO kansas City/Jefferson City 334-648-3817,\nMS Jackson 334-648-3817,\nMS Biloxi 334-648-3817,\nMS Gulf Port 334-648-3817,\nMT helena 334-648-3817,\nNC Raleigh 334-648-3817,\nND Bismark 334-648-3817,\nNE Lincoln 334-648-3817, \nNJ Trenton 334-648-3817,\nNM Santa Fe 334-648-3817,\nNV Carson City 334-648-3817,\nNV Las Vegas 334-648-3817\nNY Albany 334-648-3817,\nOH Columbus 334-648-3817,\nOK Oklahoma Ciy 334-648-3817,\nOR Salem 334-648-3817,\nPA harrisburg 334-648-3817,\nRI Providence 334-648-3817,\nSC Columbia 334-648-3817,\nSD Pierre 334-648-3817,\nTN nashville 334-648-3817,\nTX Austin 334-648-3817,\nUT Salt Lake City 334-648-3817,\nVA Richmond 334-648-3817,\nVT montpelier 334-648-3817,\nWI Madison 334-648-3817,\nWV Charleston 334-648-3817,\nWY Cheyenne 334-648-3817
We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction, from the start to the completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.\n
Relentless work ethic, always go above and beyond, willing to do anything, anywhere, in any conditions for how ever long it takes for completion and satisfaction.
There is a reason many commercial garages and storage facilities have roller garage doors. They stand out as one of the most secure options due to their unique design. The compact installation and absence of visible leverage points on the sturdy aluminum curtain make them a formidable obstacle for potential intruders.
Is your wrought iron gate really rusty or in need of major repair work? Replacing it with a gate with built-in privacy screening may be easier and, in some cases, more economical. Professional fence or gate repair costs average $100 to $400, and you may be able to get a new gate for the same price.
The cost to install a gate varies widely, with a typical range between $1,500 and $7,000. The average cost is around $3,500. However, the final price can be as low as $200 for a simple gate or as high as $12,000 for a large, automated security gate.
Key factors that determine the installation cost include:
Gate Material: This is a primary cost factor. Chain-link and vinyl are the most affordable, while wood and PVC are mid-range options. Wrought iron, aluminum, and other metals are the most expensive materials.
Automation: Automated gates are significantly more expensive than manual ones because they require motors, sensors, controls, and electrical installation.
Size and Type: The dimensions and style of the gate (e.g., swinging vs. sliding) will impact the price.
Security Level: Gates with advanced security features will increase the overall cost.
To stop trash from blowing under your gate, you can install anti-litter netting. This solution prevents most large debris from being blown inside of a controlled area and is often used in construction sites. Many types of netting are not designed for permanent use, so you may need to search for a style that matches your gate color.
Yes, clean regularly, lubricate hinges or tracks, and inspect for damage to ensure smooth operation.
The Dry Fork, VA homeowners’ guide to driveway gate services
From average costs to expert advice, get all the answers you need to get your job done.
Gate installation costs depend on the material your gate is made of, and the type of gate you want to install. Explore all the gate installation cost factors in this guide.
Discover the average automatic gate installation cost, key price factors, and ways to save. Get expert tips for homeowners planning a new automatic gate.
Learn how to hire a qualified driveway gate installer. Discover questions to ask, qualifications to check, and tips for finding the right pro for your project.
