Top-rated glaziers.

Get matched with top glaziers in Atlantic, VA

Enter your zip and get matched with up to 5 pros

Need a pro for your glazier service project in Atlantic, VA?

Select your specific project to find the pro for you.

Find Glaziers in Atlantic

Avatar for JES Foundation Repair
JES Foundation Repair
4.2(
946
)

Serving Atlantic, VA and surrounding areas

Approved (Corporate)

In business since 1993

Free estimates

Emergency services offered

"JES replaced some major beams under our house, installed some jacks, and installed a sump pump. This was certainly a major project, but thanks to Diandre Williams, Yasser Garcia, and Thomas Jackson from JES, there was no disruption or inconvenience to our family. They arrived on time, checked in with us, explained what was going on, and went right to work. They were professionals and kept their workplace (our driveway!) neat and clean during the entire process. After they were finished Yasser, Deandre, and Thomas spent some time with my wife and me explaining what they did and what we need to do should we have concerns in the future. They even had pictures of what was done and showed us the beams they removed. And after their truck pulled away, there was no indication that they had even been there, not even some sawdust; that was impressive."
Protect Your Basement
Correct Your Wet Basement
Waterproof Your Basement
Protect Your Concrete
Polyurethane Foam Injection

+12

146 neighbors recently requested a quote
Recommended by81%of homeowners
West Shore Home Salisbury
New to Angi

Serving Atlantic, VA and surrounding areas

Approved

In business since 2006

Free estimates

Credit card accepted

West Shore Home offers a risk-free home improvement experience, so you never have to worry that you are sacrificing on quality, convenience, or expertise. We specialize in window, entry door, shower and bath replacements, including walk-in tubs. We offer fully customizable, limited lifetime-guaranteed solutions installed in as little as one-day. All of our installers are in-house employees, so we can guarantee the quality of the whole project from start to finish. We get it done the way you want - fast, easy, smart and right.\n \nOur team is following all CDC guidelines so we can provide you with the fast and convenient home improvements. We are also offering free virtual design consultations! Schedule your free consultation today.

51 neighbors recently requested a quote
Avatar for American Jewel Window Systems
American Jewel Window Systems
4.5(
259
)

Serving Atlantic, VA and surrounding areas

In business since 1937

Credit card accepted

"I am extremely happy with AJ's service, start to finish. We initially reached out for an estimate at the beginning of 2015. A representative came to our house to explain all the different products as well as pricing and timing. I had reached out to 2 other companies before hand but was not comfortable their high pressure selling. AJ was very patient with us regarding our timing and budget. I received an estimate on the spot and was able to take my time to review and get back to them. We scheduled the work for May and was able to have 7 Windows removed and replaced in only a few hours. We are very impressed with the quick respond time, professionalism and quality of work including cleanup. We plan on using AJ to replace the remaining Windows as well as a sliding glass door in early 2016.
"
Woodgrain Double Hung
Additional Photos
Additional Photos
Recommended by95%of homeowners
Avatar for Exterior Pros of America
Exterior Pros of America
4.5(
94
)

Serving Atlantic, VA and surrounding areas

In business since 2011

Free estimates

Emergency services offered

"The installers arrived on time and were professional in their work.  I had done a lot of research on gutter guard systems and determined that the Gutter Dome was the best solution - stainless steel with a mesh that would not pass debris from the roof or pine needles.  They finished fairly quickly and appeared to have done a good job.  Upon later closer inspection we found some roofing shingles that were left up and several ends that were not finished.  We have a "V" joint where the garage roof meets the main house.  We were assured that the Gutter Dome would capture the water flow in this corner without a baffle.  That turned out not to be the case, so they returned to add a baffle, finish the ends and lay the shingles flat.
      Later we found that a light mist or heavy dew would not go through the mesh so we ended up with a constant dripping all around the house.  This would not be a problem except that it drips right over the front and rear entrance doors and that moisture freezes in the winter leaving a slick coating of ice.  In a heave dew the water collects and runs in rivulets across the surface of the Gutter Dome and over the edge of the gutter.  The solution was supposed to be a scrubbing with a detergent such as Simple Green and/or the passage of time.  Not so.  After over a year it was still dripping.  The company is now under new ownership but after an initial miscommunication we had a visit from Will to try to correct the problem.  He arrived on time, in fact early enough to observe the dripping.  His initial idea was to run a bead of silicone along the surface of the Gutter Dome, but I questioned the longevity of that solution.  He ended up installing a 1/4" hand-cut deflector near the edge of the gutter.  Unfortunately that didn't help. 
    After a few more calls and discussions with Kieth and Dan, Will came back and replaced a number of sections of the Gutter Dome with the slightly wider mesh Magna.  Water from heavy dew and light rain can more easily get through the Magna's surface and that appears to have taken care of the problem.  It's almost impossible to tell where one stops and the other begins except for the drips over the edge of the gutter.  No pine needles or debris get through either.
     This dripping was not a problem with our old system (which is no longer available) and we were very disappointed with the way this installation had turned out but impressed with Kieth, Dan & Will's willingness to correct it.  In the meantime I've changed their responsiveness and overall rating to A's thanks to their efforts.  I will say, however that it took numerous calls and quite a bit of time before they did come back (we are 2 hours away from their location but within their service area), so be persistent.
     All in all we are happy with the installation and still believe this is the best gutter guard system available.  I would not hesitate to use them if we were starting over again."
GutterDome Installed
GutterDome Award
Half Round Job Fairfax Station
Recommended by88%of homeowners
Avatar for Ferguson Home Improvements LLC
Ferguson Home Improvements LLC
4.4(
46
)

Serving Atlantic, VA and surrounding areas

In business since 2009

Free estimates

Credit card accepted

"Two painters arrived on time on Friday and worked all day and did the priming and partially broke up the hearth, with a chisel and a hammer. Personally I think it would have been easier on them if they had used a hammer drill. Two more painters arrived on time on Sat. and did the rest of the hearth, finished painting and did the trim. They did a very professional job on time and on budget and I would use them again.
"
Recommended by87%of homeowners
Showing 1-10 of 39
Glaziers questions, answered by experts

The easiest way for DIYers to smooth the edges of cut glass is to use sandpaper. Wearing protective gloves, gently sand the sharp edges smooth using low-grit sandpaper and working up to high-grit sandpaper. You can also use a multitool with a rotating sandpaper cylinder to make quicker work of the project.

Generally, large bathroom mirrors that have been secured to the wall with glue require a multistep removal process. By taping the mirror with masking tape or duct tape, you can potentially prevent dangerous shards from falling as you loosen the mirror. A heat gun or other heat source may be needed to loosen up the glue before it can be freed using a wire saw. With glued-down mirrors being the most dangerous to remove, it's wise to hire a professional instead of handling glass on your own.

There’s no exact formula to calculate the cost of your mirror, but a few guidelines will help you estimate the price tag you can expect. The bigger the mirror, the higher the cost—and the same goes for thickness. Customizations will largely depend on the labor required, so think about how long your design will take and multiply that by your contractor’s hourly rate.

Replacing window glass instead of the entire window is more cost-effective, maintains the frame's aesthetics, and reduces waste. It improves insulation and energy efficiency and can be completed more quickly with minimal disruption to the home.

The height of a mirror behind a vanity depends on several factors, including the height of the vanity, the placement of the faucet (on the wall or countertop), and the height of the faucet. A good rule of thumb is to hang the mirror 5 to 10 inches above the vanity’s highest point. However, you may need to lower the mirror based on the vanity size and overhead lighting placement.

The Atlantic, VA homeowners’ guide to glazing services

From average costs to expert advice, get all the answers you need to get your job done.