Get matched with top driveway gate pros in Alberta, VA

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

The obvious disadvantage of an automatic gate is that it runs on electricity. If the power goes out, it won’t open or close unless there’s a manual override. Many homeowners will need a backup generator so they don’t get stuck on either side of the gate, particularly when looking to park a vehicle. Automatic gates are also much more complicated than manual gates, with tech-heavy components that make them more expensive to repair.

Your wooden gate post hole should be a third to a half of the height of the post. Also, note that the diameter of the post hole should be three times the diameter of the post. You should set the post in concrete to ensure a long-lasting and durable post that will withstand the test of time.

Generally, the standard 10- to 12-inch-long and 1- to 1.5-inch-diameter gate springs will work. However, if you have an especially wide, thick, or heavy garden gate, you may need to opt for a longer, broader—and pricier—model to ensure secure closure and good longevity. These typically range between 12 and 16 inches long and are over 1.5 inches in diameter.