Can you put a doorway in a structural wall?

• <div><p>Yes, you can put a doorway in a structural wall; in fact, most exterior doors are set into structural walls. The project is a little more challenging than installing a door in a non-load-bearing wall because you need a structural engineer to assess the wall and make sure it’s safe to create a wall opening. Your engineer’s report will include instructions for your contractor on how and where to install additional supports, like steel headers above the door, to distribute the weight above to the wall on either side of the door.</p></div>

Get matched with top structural engineers in Providence, UT

Q: Are horizontal cracks structural?

• <div><p>Many horizontal cracks in home foundations result from water and soil pressure from outside of the building or from a footing that is shifting. Under those circumstances, horizontal cracks are a structural problem that requires repair before they become worse and more difficult to fix. However, in very specific cases, thin horizontal cracks may simply be a cosmetic blemish due to concrete shrinkage. </p></div>

Q: Is a structural engineer’s report worth it?

• <div><p>A structural engineer&rsquo;s report is almost always worth it, as it can help you avoid buying or overpaying for a home with structural issues. The most important thing the report does for you is provide peace of mind that you won&rsquo;t have to pay thousands of dollars for structural repairs right after closing on a property. </p></div>

Q: How long does a structural assessment typically take?

• <div><p>A few hours for inspection, with a detailed report following in a week.</p></div>

Q: How much weight does a 4-inch concrete slab support?

• <div><p>A 4-inch-thick concrete slab can support around 4,000 pounds per square foot if a contractor reinforces the slab with rebar, while that same slab without reinforcements will support closer to 1,000 pounds. For the purposes of a patio, 4 inches in thickness without reinforcement should suffice unless you&rsquo;re installing heavy kitchen equipment or a hot tub on it. In those cases, reinforcing your slab and sticking with 4 inches of thickness should provide plenty of strength.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Providence, UT?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Providence, UT

*The Angi rating for Structural Engineering companies in Providence, UT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Providence, UT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on December 30, 2025

Reviewed in December 2025
Brandon has done several carpentry projects for me. I have been extremely happy with his work. I recommend him for whatever building projects you have.
Smith Built 4 Service
Request a quote
Reviewed in November 2025
I recently had my home remodeled, and I couldn?t be happier with the results. From start to finish, they were professional, communicative, and clearly took pride in their work. They listened to what I wanted, offered helpful suggestions, and kept me updated throughout the whole process. The...
Blue crown construction LLC
Request a quote
Reviewed in October 2025
I called for an estimate, and Kristy came right out. She was friendly and sweet and I loved her sense of humor. An aspen tree on the property we recently purchased, was right in a mess of power lines, both to my structures, and to my neighbor’s. It was driving both my neighbor and me, bonkers. I...
Unicorn Tree Services, LLC
Request a quote
Reviewed in July 2023
David did a great job, would recommend him to anyone, very expertly finished. This was a tough install through a 7.5” exterior wall, and it looks perfect! Thank you David!
DK Handyman Services LLC
Request a quote
Reviewed in January 2023
They framed the outside wall of a carport and then installed they outside metal corrugated sheeting and did an excellent job. It looks terrific and keeps th snow off the equipment. They sent me photos during the construction and discussed the detail with me.
DK Handyman Services LLC
Request a quote
Reviewed in December 2022
Josh did such a great job! We've had him do two jobs for us - he repaired water damage in the ceiling & wall in our basment pantry. It was a mess and he made it look like it did the day we bought our home(if not better)! He also fixed the mess that the electricans made while adding a...
The Patch Boys of Northern Utah
Request a quote
Reviewed in January 2022
YKC Construction is great. They were easy to work with and did a great job on my project. I'm planning to have them help me out with some new projects!
YKC Construction
Request a quote
Reviewed in June 2021
Very friendly, accommodate needs, fair pricing, excellent quality. Will be looking forward to contracting them at every fencing need!
Lopez Vinyl Fencing, LLC
Request a quote
Reviewed in June 2020
I had an unusual dilemma. Basically I wanted to restore my barns structural integrity. Mr Tolman impressed me with his problem solving abilities as well as his skills. I would highly recommend his company.
TDS - Tolman Diversified Services, LLC
Request a quote
Reviewed in January 2020
I felt it was important to have a structural engineer look at the problem. The person who was here was very knowledgeable but I don't know what his qualifications are to assess my issue.
Foundation and Crawl Space Repair of Idaho
Request a quote

Find Structural engineers in Providence

Ballpark Engineering

4.4(

)

Serving Providence, UT and surrounding areas

In business since 2018

Emergency services offered

Warranties offered

"Ballpark did a great job helping us create a new floor plan! I would highly recommend them to anyone looking for architectural or structural engineering work"

+11

Response time10 hrs

Recommended by85%of homeowners

Request Quote

LWE

New to Angi

Serving Providence, UT and surrounding areas

In business since 2010

Free estimates

-structural engineering

Serving Providence, UT and surrounding areas

In business since 1995

EEI has been in business for 6 years. With offices in Reno NV, Carlsbad CA, and Camarillo CA EEI provides Environmental, Engineering and Architectural services. If you need Engineering or Architectural services please send an e-mail to [email protected]. A complete company profile can be seen at www.eeitiger.com, or call us in Reno at (775) 746-1980 to discuss how we can assist you.

Serving Providence, UT and surrounding areas

In business since 2016

Free estimates

Credit card accepted

We specialize in all phases of remodeling for your home, business, bathrooms, kitchens, finishing basements, and more! We are a one-stop design-build firm. We also have some financing options with no money down or interest for 24 months (Must Qualify).\n\nWe guarantee your satisfaction, and we won’t leave until the job is done right. \n\nWe pride ourselves on the quality work we provide, while delivering great customer service!\n\n\nCheck out all the services we offer below and call -or- click to schedule a free Design Consultation today!

+31

Recommended by33%of homeowners

Request Quote

Structural Engineering questions, answered by experts

Many horizontal cracks in home foundations result from water and soil pressure from outside of the building or from a footing that is shifting. Under those circumstances, horizontal cracks are a structural problem that requires repair before they become worse and more difficult to fix. However, in very specific cases, thin horizontal cracks may simply be a cosmetic blemish due to concrete shrinkage.

A structural engineer’s report is almost always worth it, as it can help you avoid buying or overpaying for a home with structural issues. The most important thing the report does for you is provide peace of mind that you won’t have to pay thousands of dollars for structural repairs right after closing on a property.

A few hours for inspection, with a detailed report following in a week.

A 4-inch-thick concrete slab can support around 4,000 pounds per square foot if a contractor reinforces the slab with rebar, while that same slab without reinforcements will support closer to 1,000 pounds. For the purposes of a patio, 4 inches in thickness without reinforcement should suffice unless you’re installing heavy kitchen equipment or a hot tub on it. In those cases, reinforcing your slab and sticking with 4 inches of thickness should provide plenty of strength.

Yes, you can put a doorway in a structural wall; in fact, most exterior doors are set into structural walls. The project is a little more challenging than installing a door in a non-load-bearing wall because you need a structural engineer to assess the wall and make sure it’s safe to create a wall opening. Your engineer’s report will include instructions for your contractor on how and where to install additional supports, like steel headers above the door, to distribute the weight above to the wall on either side of the door.

The Providence, UT homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Alison Kasch
•
Apr 4, 2026Apr 4, 2026
How Much Does It Cost to Remove a Load-Bearing Wall? [2026 Data]
Do you have a load-bearing wall standing between you and your projects that you want to remove? Learn about the cost of removing a load-bearing wall.
Haley Nothstein
•
May 30, 2026May 30, 2026
How Much Does It Cost to Replace a Main House Support Beam? [2026 Data]
A damaged main support beam can cause serious structural damage to your house. Learn how much it costs to replace a main house support beam.
Timothy Moore
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install an LVL Beam? [2026 Data]
Looking to remove load-bearing walls and vertical supports to open up your living space? Learn about what affects the cost to install an LVL beam.
Dan Simms
•
Apr 9, 2026Apr 9, 2026
What Is a Structural Engineer and Do You Need One?
Learn what a structural engineer is, what they do, when you might need to hire one for your home project, and how much they charge.
Rachel Hoffman
•
Apr 5, 2026Apr 5, 2026
Structural Engineer vs. Architect: Their Differences and Why You Need Both
Do you have an upcoming construction project and aren’t sure whether hiring a structural engineer vs an architect is better? Find out here.
Dan Simms
•
Apr 9, 2026Apr 9, 2026
Why You May Need to Hire a Structural Engineer for a Home Inspection
Learn why it might be a good idea to hire a structural engineer for a home inspection in addition to a general home inspector when you’re purchasing a home.