Get matched with top structural engineers in Payson, UT

Q: Is it okay to drill into a load-bearing beam?

• <div><p>You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it&rsquo;s safest to drill and the width and depth of the bit that&rsquo;s safe to use.</p></div>

Q: Can a one-story house have a load-bearing wall?

• <div><p>Yes, a one-story house can have a load-bearing wall. The load-bearing walls in a single-story home are usually the exterior walls. If the house has a basement with exposed walls, the arrangement of the beams can help indicate what walls are load-bearing.</p></div>

Q: What is the 10 10 rule in construction?

• <div><p>The 10 10 rule describes the formula most contractors use to determine how much to charge for a job. Allowing for 10% overhead above the total projected cost to do the work and 10% profit sets a contractor up for success, even if there are delays or other problems on the project. This formula isn&rsquo;t a hard-and-fast rule, but it is a ballpark figure to begin with when estimating your expenses on a job.</p></div>

Q: Is precast concrete reinforced?

• <div><p>Precast concrete can be reinforced with rebar, wire mesh, or other materials to improve its strength and add stability. Precast concrete for large construction projects is often pre-stressed as well for greater structural strength. Reinforced concrete is durable and strong, making it an ideal choice for many construction projects.</p></div>

Q: How do contractors cut a doorway in a concrete block wall?

• <div><p>First, most contractors will have a structural engineer create a report and plan for your project to ensure it&rsquo;s safe to cut into the load-bearing wall. The contractor will then excavate around the wall, if necessary, measure the opening&mdash;allowing for additional space to fit and level the door, and then cut the doorway out. They will likely install a steel lintel as a header over the door for support. Once the doorway is cut out, they&rsquo;ll demolish the concrete using sledge hammers and masonry chisels, clean up the surrounding concrete, and seal around the door with masonry mortar. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Payson, UT?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Payson, UT

*The Angi rating for Structural Engineering companies in Payson, UT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Payson, UT is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on March 04, 2024

Reviewed in March 2024
Highly professional and knowledgeable on what I needed with all the new construction going on around me.
Redstone Pest Control LLC
Request a quote
Reviewed in January 2024
By far the best company I have worked with. They were quick, honest, efficient, experienced, knowledgeable and nice! I had lots of questions and they make the process so smooth! I would recommend this company to anyone looking for excavation work, concrete removal, concrete prep and concrete....
Precision Concrete Removal
Request a quote
Reviewed in January 2024
We had a useless patio slab with rickety stairs going down to it. He came in and designed and then built a composite deck solution that was level with the house floor so we could walk out, fit all 10 of us out on a nice evening for dinner, and enabled storage underneath the deck. It was a...
A Home Repair and Aging In Place Home Modification
Request a quote
Reviewed in August 2023
Excellent. Jed pruned an old apple tree so that it’s at the right height for me to pick. Carefully taking away branches to balance out the structure of the tree. He then dorayed it with a natural pest repellent. My tree is flourishing with fruit. Which makes me happy.
Norwood tree service
Request a quote
Reviewed in June 2023
I hired Lifetime Roofing in 2017 to install new shingles. Almost 5 years later, we found a leak after removing our shower in the master bath. After inspection, we realized that Lifetime Roofing failed to install the metal flashing where the roof meets the stucco wall. We have two areas that were...
Lifetime Roofing
Request a quote
Reviewed in March 2023
Our experience with AMK builders was difficult to say the least. They had negotiated a price slightly down from the original bid on the basis that we paid cash instead of a bank draw, with the mutual understanding that we would pay in 1/3 increments; 1/3 at 33% of the work completion, 1/3 at...
AMK Builders LLC
Request a quote
Reviewed in May 2021
They corrected concrete faults, did a multi layered poly aspartic coating on my patio. They were prompt, honest, good workers. We had pleasant interactions. They returned to make some needed improvements even after paid in full. Went the extra mile. Price was considerably lower than...
Tailored Closet of Utah County, East Salt Lake & Park City
Request a quote
Reviewed in October 2020
Things started out great with Duane V Fafita and Glendale Contractors LLC. He was very attentive and willing to communicate to get the job started. Once the job started it went downhill fast. We hired them to pour footings for a 20 X 30 garage. The job included tearing out an old driveway, and...
Glendale Contractor LLC
Request a quote
Reviewed in February 2017
The permit process was a breeze. I was worried about that but the engineers did everything. My system had a hiccup because of my wifi system and they came out twice to make sure it was working and ensured power gen. Very professional. Prompt. System works great.
Nuera Solar
Request a quote
Reviewed in August 2015
Our rototiller broke -- handles shirred right off -- and we needed to have it welded. We came to H2 and are so glad we did! Justin and Mandy are amazing -- awesome customer service. Justin not only fixed the handlebars, he painted them and secured the cover in a much better way than the...
H2 Welding
Request a quote

Find Structural engineers in Payson

Level Engineering Utah

4.4(

296

)

Serving Payson, UT and surrounding areas

Approved

In business since 2015

Small jobs welcome

Credit card accepted

"Very experienced structural engineer who could analyze our rooftop deck and give us a plan for doing the roof and hotub of our dreams!"

+12

Response time1 day

29 neighbors recently requested a quote

Recommended by91%of homeowners

Request Quote

LWE

New to Angi

Serving Payson, UT and surrounding areas

In business since 2010

Free estimates

-structural engineering

Request Quote

Pine Shade Contracting LLC

5.0(

)

Serving Payson, UT and surrounding areas

Free estimates

"Perfect, I would use again"

PICKLE BALL and MULTI SPORT COURT INSTALLATION

GAS STATION BARRIER POLE INSTALLATION- Small Commercial

+71

Recommended by100%of homeowners

Request Quote

Borner Engineering

New to Angi

Serving Payson, UT and surrounding areas

In business since 1986

Free estimates

Credit card accepted

We are an ethical, honest and professional company. We are easy to communicate with. Always working with you until the job is done right and to your expected integrity, prompt service and superior customer service. Always leaving the job site clean . We take pride in our services and enjoy making clients repeat clients. You can count on us to get the job done right the first time. We will meet with you at your convenience and will not keep you waiting. Call us today for your free estimate. You'll be pleased you did. Thank you!\n\n

Response time2 days

Request Quote

Blue Sky Engineering

New to Angi

Serving Payson, UT and surrounding areas

Small jobs welcome

Credit card accepted

Offers commercial services

Blue Sky Engineering is a leading structural engineering company in Salt Lake and Utah counties. We provide top-notch structural engineering services for projects of all sizes. Whether you’re looking to build your dream home, make seamless home additions, or embark on new home construction, we ensure your vision is anchored on a solid foundation.\n\nOur team also conducts structural assessments for homeowners, REALTORS®, and property management companies, ensuring safety and reliability in every project.

Serving Payson, UT and surrounding areas

In business since 1995

EEI has been in business for 6 years. With offices in Reno NV, Carlsbad CA, and Camarillo CA EEI provides Environmental, Engineering and Architectural services. If you need Engineering or Architectural services please send an e-mail to [email protected]. A complete company profile can be seen at www.eeitiger.com, or call us in Reno at (775) 746-1980 to discuss how we can assist you.

Serving Payson, UT and surrounding areas

In business since 2016

Free estimates

Credit card accepted

We specialize in all phases of remodeling for your home, business, bathrooms, kitchens, finishing basements, and more! We are a one-stop design-build firm. We also have some financing options with no money down or interest for 24 months (Must Qualify).\n\nWe guarantee your satisfaction, and we won’t leave until the job is done right. \n\nWe pride ourselves on the quality work we provide, while delivering great customer service!\n\n\nCheck out all the services we offer below and call -or- click to schedule a free Design Consultation today!

+31

Recommended by33%of homeowners

Request Quote

Structural Engineering questions, answered by experts

You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it’s safest to drill and the width and depth of the bit that’s safe to use.

Yes, a one-story house can have a load-bearing wall. The load-bearing walls in a single-story home are usually the exterior walls. If the house has a basement with exposed walls, the arrangement of the beams can help indicate what walls are load-bearing.

The 10 10 rule describes the formula most contractors use to determine how much to charge for a job. Allowing for 10% overhead above the total projected cost to do the work and 10% profit sets a contractor up for success, even if there are delays or other problems on the project. This formula isn’t a hard-and-fast rule, but it is a ballpark figure to begin with when estimating your expenses on a job.

Precast concrete can be reinforced with rebar, wire mesh, or other materials to improve its strength and add stability. Precast concrete for large construction projects is often pre-stressed as well for greater structural strength. Reinforced concrete is durable and strong, making it an ideal choice for many construction projects.

First, most contractors will have a structural engineer create a report and plan for your project to ensure it’s safe to cut into the load-bearing wall. The contractor will then excavate around the wall, if necessary, measure the opening—allowing for additional space to fit and level the door, and then cut the doorway out. They will likely install a steel lintel as a header over the door for support. Once the doorway is cut out, they’ll demolish the concrete using sledge hammers and masonry chisels, clean up the surrounding concrete, and seal around the door with masonry mortar.

The Payson, UT homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Lyle Hendriks
•
May 5, 2026May 5, 2026
How Much Does Beam Installation Cost [2026 Data]
Beam installation costs are an important consideration if you’re building a home or doing renovations. Learn about average costs and factors in this guide.
Timothy Moore
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install an LVL Beam? [2026 Data]
Looking to remove load-bearing walls and vertical supports to open up your living space? Learn about what affects the cost to install an LVL beam.
Dan Simms
•
May 30, 2026May 30, 2026
How Much Does a Structural Engineer Cost to Hire? [2026 Data]
The cost of a structural engineer is easily justifiable given the value they bring to the table. Use this guide to see what hiring your professional will total.
Rachel Hoffman
•
Apr 5, 2026Apr 5, 2026
Structural Engineer vs. Architect: Their Differences and Why You Need Both
Do you have an upcoming construction project and aren’t sure whether hiring a structural engineer vs an architect is better? Find out here.
Em Norton
•
Apr 10, 2026Apr 10, 2026
Everything to Know About LVL Beams
What is an LVL beam? Read about LVL beams to determine if this material is safe and suitable for your project.
Rachel Hoffman
•
May 3, 2026May 3, 2026
15 Warning Signs That a House Will Collapse
A home doesn’t collapse unexpectedly. Learn the warning signs that a house will collapse, so you can protect your family and your home.