Get matched with top door pros in Kearns, UT

Most of the time, a squeaky door is the result of dry hinges, where metal parts rub together without enough lubrication. Dirt, dust, or rust can also build up inside the hinge and add to the friction. Loose screws or slight misalignment can shift things just enough to create that irritating squeaking noise. Worn-out hinges or swelling wood from humidity changes can also be part of the problem on older doors. A good cleaning and proper lubrication usually take care of it, but if the squeak sticks around, it’s worth checking for bigger issues with the hinges or alignment. 

The vast majority of hinges are symmetrical, and either side of the hinge can go on the door or the frame. Occasionally, you'll find a hinge specifically made for right or left-handed doors with different attachment hardware or larger plates on one side. In most cases, the large side of the hinge goes on the frame.

It is possible to install hinges backward, so be careful when placing them. Position the hinge so that the hinge pin faces the direction the door will swing. For example, if you're standing on the side the door will open into, the pin should be visible. Be extra careful when installing exterior doors, as placing the hinges on the outside for an outward-facing door makes your home much easier to break into.

Not every door can be converted into a pocket door. Pocket doors require specific hardware and a hollow space within the wall to slide into when open. The door must be sturdy enough to handle the sliding mechanism but not too heavy, as excessive weight can cause operation and track alignment issues. While some standard interior doors can be adapted for use as pocket doors with the right hardware, it's essential to ensure the door's compatibility and the structural feasibility of creating a pocket in the wall.

Most modern, standard doors are 1 ⅜-inches thick, so you should aim for this thickness unless you're building a door to replace an antique door or fit into a non-standard wall opening. Thickness varies when installing a pocket door or sliding barn door, so a good rule of thumb is to measure your existing door, if possible. For standard doors, you can also measure from the inside of the door to the door stop to gauge the proper thickness.