Get matched with top fencing pros in Annabella, UT

In most cases, you will need a building permit to put up a vinyl fence, especially if the fence is sitting on or close to your property line. You can ask your local building department or  fence installation company if your fence project will require a permit. If so, you can expect it to cost between $20 and $60. Your fence installer should pull the permit for you. Building without a permit could eventually require you to pay again to remove the fence and reinstall it after getting the job approved.

A chain link fence typically lasts between 15 and 20 years, but with proper maintenance, it can last for 30 years or more. To preserve the fence, it's important to keep the mesh wire tight, which can be done with a come-along tool every 6 to 12 months. Investing in a fence with a galvanized, powder-coated, or vinyl-coated finish can increase its lifespan to 20 to 30 years and reduce maintenance needs, as these coatings provide extra protection against the elements.

There are two things you can do to make a fence replacement easier—but keep in mind that easier doesn’t mean better. First, you can use a jack or some other type of machinery to pull the post out of the ground. If that’s not available, a digging bar can help.

Second, you can backfill the hole with gravel rather than creating a concrete footing. Keep in mind, gravel is less secure. You should only use it if you’re installing a lightweight fence or have heavier, clay soil.

This depends mainly on how well the posts were installed and what type of wood was used to build the gate in the first place. Softwoods have a life expectancy of up to 15 years but can last slightly longer with regular maintenance and waterproofing treatments. By contrast, hardwoods can last up to 30 years with little care, so you may avoid costly replacements by spending a little more upfront.