Get matched with top roofers in White Oak, TX

Installing solar panels involves drilling small holes in your roof to secure the solar panel mounting brackets. These brackets hold the solar panels in place and must withstand strong weather conditions so they’re secured into your roof. However, holes and screws are sealed to prevent leaking and further damage.

A chimney cap costs about $300 on average to install, with prices ranging from $75 to $1,000. The final cost depends on several factors, including the professional you hire, the accessibility of your chimney, the cap's material and size, whether any repairs are needed, and if it requires custom fabrication. Chimney caps are usually made from galvanized steel, stainless steel, or copper. Copper caps are the most expensive, followed by stainless steel and then galvanized steel. Excluding labor, average material costs are around $100 for galvanized steel, $250 for stainless steel, and $600 for copper. You may also face additional costs, such as hiring a chimney sweep to clean the chimney before the cap is installed.

Generally, hailstones that are one inch in diameter or larger can cause significant damage to a roof. However, smaller hail can also cause damage, particularly when accompanied by strong winds, if it strikes an aging or poorly maintained roof, or if hailstorms are frequent in your area. Hail that is ¼ inch (pea-sized) or smaller poses a minimal risk of immediate, permanent damage, but cumulative impacts can cause deterioration over time. The extent of the damage also depends on the roofing material; hail-resistant tiles like slate or certain types of asphalt shingles can withstand impacts better than other materials. If you are concerned about potential damage after a storm, it is always a good idea to have a professional roofer conduct an inspection.

Metal roofs have a reputation for being noisy, but with proper installation and adequate insulation, they are not significantly noisier than shingle roofs. The type of metal used can affect the sound level; for instance, steel roofs are typically noisier than slate or asphalt tiles but quieter than aluminum. While some people find the sound of rain on a metal roof pleasant, you can take steps to reduce the noise. Installing a thicker underlayment, adding insulation between the roof and the house, or using acoustic tiles can effectively muffle the sound. The gauge (thickness) of the metal roofing can also contribute to sound dampening.