Get matched with top sandblasting pros in Spearman, TX

Q: How much does sandblasting cost?

• <div><p>The cost of sandblasting depends on the scope of the project, the surface type, labor, and equipment required. Services typically cost between $50 and $80 per hour, though most professionals charge by surface area at a rate of $1.50 to $7 per square foot. Total project costs can range from $700 to $12,500, with an average homeowner spending around $3,200 to sandblast a 1,000-square-foot surface.</p></div>

Q: What is the best way to sand a deck?

• <div><p>The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods. </p></div>

Q: Do you sand concrete wet or dry?

• <div><p>You can concrete can be done when it&rsquo;s wet or dry. However, it&rsquo;s safer when wet, as harmful dust and chemicals are present. Sanding it when dry is faster, but you&rsquo;ll agitate more dust and chemicals, meaning you&rsquo;ll need to be more careful.</p></div>

Q: What does sand do?

• <div><p>Sand is a common sublayer for hardscape features like driveways, paver patios, and more. Most projects that involve sand require a 1-inch layer to promote evenness, drainage, and weight distribution. For further drainage, most projects have a 6-inch minimum layer of gravel beneath the sand. </p><p> </p></div>

Q: Is it better to sand or pressure wash a deck?

• <div><p>Sanding and pressure washing serve different purposes in deck maintenance, so one is not necessarily better than the other. Pressure washing is ideal for annual cleaning to remove dirt, grime, mold, and mildew. Sanding is a deeper restoration method used to smooth rough surfaces, remove an old finish, and prepare the wood for a new coat of stain or paint. The ideal process for refinishing a deck is to first clean it (with a power washer), then sand it, and finally apply the new stain or finish. While cleaning should be done annually, sanding and staining are typically needed only every one to three years.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your sandblasting service project in Spearman, TX?

Select your specific project to find the pro for you.

Find Sandblasting pros in Spearman

Lone Star Blasting and Coating LLC

4.8(

)

Serving Spearman, TX and surrounding areas

In business since 2024

Free estimates

Credit card accepted

"Honest, dependable, fast, good job. Everything i want in a contractor. Use them"

Response time7 hrs

Recommended by100%of homeowners

Request Quote

Ace Sandblasting and Restoration

3.7(

)

Serving Spearman, TX and surrounding areas

In business since 1977

Small jobs welcome

Credit card accepted

"Ronnie got my parts in and out very quickly. The price was reasonable and the work was excellent. Will definitely use Ace Sandblasting in the future."

+94

Response time11 hrs

Recommended by75%of homeowners

Serving Spearman, TX and surrounding areas

In business since 2019

Free estimates

Emergency services offered

"They were very friendly and fast, excellent service"

Recommended by100%of homeowners

Serving Spearman, TX and surrounding areas

In business since 2011

Free estimates

Credit card accepted

"Great! They arrived at the time they promised. They were careful around my shrubs. The brick and siding of the house looked great and I was shocked at the difference having the driveway pressure washed made. I have asked them to contact me every 6 months to have it done again."

+12

Recommended by100%of homeowners

Serving Spearman, TX and surrounding areas

In business since 2018

Free estimates

Emergency services offered

"The service is excellent and I will contact again ro service another property. The apt. Is now fresh & ready for my mother to simply walk in and not have to clean. This company when above and beyond!"

+22

Recommended by87%of homeowners

Serving Spearman, TX and surrounding areas

Free estimates

Emergency services offered

Credit card accepted

"The owner Josh was very knowledgeable and explained step by step what was going to happen. When it was completely done we was more than satisfied we enjoyed his kindness and thoughtfulness. Will be using again and further more permanently."

Recommended by100%of homeowners

Request Quote

CHACON Construction and Remodeling

5.0(

)

Serving Spearman, TX and surrounding areas

In business since 2008

Free estimates

"Mauricio and his crew did a great job. The addition is beautiful. He is very easy to work with on design and will go that "extra mile" to make sure you are satisfied.
"

Recommended by100%of homeowners

Request Quote

Big Time Movers

New to Angi

Serving Spearman, TX and surrounding areas

Free estimates

Credit card accepted

* 5 star ⭐️⭐️⭐️⭐️ \n White glove Movers / transport /freight / junk removal *\nWe offer the best service ‼️\n⚫️Furniture \n⚫️ Packing\n⚫️Assemble\n⚫️ Car hauling\n⚫️Affordable prices\n⚫️Provide Packing\n⚫️Free Qoutes\n\nTreat each member as family?\n\nLocal & Long distance?\n\nNo Job to Big or Small ‼️\n\nCall Now ? 863-266-1850\n\n\nThe big time movers are here to make your moving experience peaceful in calm ? -Any assembly, dissassembly, all moving pads straps, dollys & travel time ALL INCLUDED IN PRICE\n-NO HIDDEN FEES\n-We offer "free haul away", we will take any unwanted furniture at NO ADDITIONAL COST TO YOU!!\n-We do both residential & commercial moves\n-Proffessional & Honest\n-Punctual & Reliable\n-We offer furniture protection (you only pay extra for supplies)\n-We move apartments, homes, offices, warehouses & even malls!\n-We offer junk removal services (enough to fill a pick-up truck, van, or box truck)\n-Long or short distance moves

Request Quote

Applied Cryogenic Solutions

New to Angi

Serving Spearman, TX and surrounding areas

In business since 1998

Applied Cryogenic Solutions specializes in mold testing, remediation and restoration services for commercial and residential clients. We have over 100 years of combined experience serving thousands of satisfied customers, let us add you to our extensive list of satisfied customers. We are the best in the business because we truly care about the health and value of each client and their property. We are quality and detail oriented providing cutting edge technology with proven methods of success. Call us today for scheduling and testing information and your toxic mold issues go away.

Request Quote

Sandblasting Services questions, answered by experts

The cost of sandblasting depends on the scope of the project, the surface type, labor, and equipment required. Services typically cost between $50 and $80 per hour, though most professionals charge by surface area at a rate of $1.50 to $7 per square foot. Total project costs can range from $700 to $12,500, with an average homeowner spending around $3,200 to sandblast a 1,000-square-foot surface.

The best way to sand a deck is by cleaning it, sanding the boards and stairs with 60- or 80-grit sandpaper, and sanding the railings and posts with 80-grit sandpaper. You should sand in the direction of the wood grain to avoid damaging the timber. When sanding your deck, use medium pressure and aim for an even sand. Pressing too hard with a sander can damage decks, as most are softwoods.

You can concrete can be done when it’s wet or dry. However, it’s safer when wet, as harmful dust and chemicals are present. Sanding it when dry is faster, but you’ll agitate more dust and chemicals, meaning you’ll need to be more careful.

Sand is a common sublayer for hardscape features like driveways, paver patios, and more. Most projects that involve sand require a 1-inch layer to promote evenness, drainage, and weight distribution. For further drainage, most projects have a 6-inch minimum layer of gravel beneath the sand.

Sanding and pressure washing serve different purposes in deck maintenance, so one is not necessarily better than the other. Pressure washing is ideal for annual cleaning to remove dirt, grime, mold, and mildew. Sanding is a deeper restoration method used to smooth rough surfaces, remove an old finish, and prepare the wood for a new coat of stain or paint. The ideal process for refinishing a deck is to first clean it (with a power washer), then sand it, and finally apply the new stain or finish. While cleaning should be done annually, sanding and staining are typically needed only every one to three years.

The Spearman, TX homeowners’ guide to sandblasting services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Nick P. Cellucci
•
Apr 6, 2026Apr 6, 2026
How Much Does It Cost to Rent a Sandblaster? [2026 Data]
Sandblasting is a powerful method to remove paint, primer, and other coatings from hard surfaces. Learn the cost to rent a sandblaster and the factors involved.
Nick P. Cellucci
•
Jul 9, 2026Jul 9, 2026
How Much Does It Cost to Sandblast? [2026 Data]
The cost to sandblast your home’s exterior or another surface on your property depends on the method and the materials you use. Learn more with this guide.
Angi
•
May 21, 2026May 21, 2026
Who to Hire for Sandblasting Services
Wondering who to hire to sandblast? Learn how sandblasting services work, which contractors to call, and how to choose the right pro.
Angi
•
May 21, 2026May 21, 2026
How to Hire a Sandblasting Pro
Learn how to hire a sandblasting pro for your project. Find qualified professionals, ask the right questions, and get expert surface cleaning.
Mitchell Grant
•
Jul 9, 2026Jul 9, 2026
What Is Sandblasting? Everything You Need to Know
Sandblasting is a powerful technique used to strip paint, rust, and other material from a surface. Learn when you’d use this technique, its cost, and how it works.
Deirdre Sullivan
•
May 21, 2026May 21, 2026
What Is Sandblasting Paint Removal?
Sandblasting is a paint removal technique that uses high-speed projection to strip a surface. Learn about sandblasting for paint removal and when you should avoid it.