Get matched with top dryer vent cleaners in Sonora, TX

The length of an allowable dryer vent varies based on the local building codes and regulations. Typically, the maximum range is 25 to 35 feet. However, if the vent must have any 90-degree turns, you may see a reduction of five feet from the maximum. Some municipalities may have no specific maximum allowable length as part of the code. Typically, installers will run the vent over the shortest possible distance for safety. The dryer vent cleaning cost is less with a shorter vent length as well. 

Yes, you can snake a roof vent. This is one of the best ways to clear a problematic clog in a plumbing vent. You can either snake the vent by climbing on the roof and sending the plumber’s snake or auger directly down the vent opening, or you can cut a hole in the vent from inside the attic and snake it from there.

Using a leaf blower to clean your dryer vent isn't a good idea. Theoretically, the leaf blower should push the lint and debris toward the exterior vent opening, helping it exit. That's usually not what happens, though. 

Instead, the lint can get stuck further in the vent, creating a blockage and making the problem worse. You need a scrubbing tool, such as the rotating brush head on a dryer cleaning kit, to push the lint out of the ductwork.

Look for some common warning signs regarding a potential blockage when wondering how to check a dryer vent for clogging. If you are suddenly seeing more lint left inside the dryer and in the lint trap, you may have an active blockage. Additionally, if the dryer is taking longer than usual to dry clothing, a clogged vent may be the culprit. If the dryer is turning itself off because of overheating, this is a potentially dangerous sign of a blockage that requires immediate cleaning of the vent. Clogged vents could introduce a fire hazard.