Get matched with top furniture refinishers in Port O Connor, TX

If your wood stain is still rubbing off after the recommended drying time, it means the pigments didn’t soak into the wood properly and remain on the surface. There are a few possible causes, including applying the stain in hot temperatures, applying too much stain, or failing to wipe off excess before it dries completely.

Avoid using wood filler for structural repairs or areas with extensive damage. Wood filler is designed for cosmetic fixes like filling small holes, cracks, or surface imperfections, and it doesn't provide the strength needed for load-bearing repairs or large gaps. You also shouldn’t use wood filler in areas exposed to heavy moisture or extreme outdoor conditions unless it’s a product specifically rated for such environments. Wood replacement or a strong epoxy resin is a better solution for severe rot or structural damage.

Chalk paint can be applied without sanding first. Keep in mind that while there are a lot of chalk paint color options available, there aren’t as many choices as latex or oil-based paint.

You can also learn how to paint furniture without sanding using a liquid deglosser, sometimes referred to as liquid sandpaper. This can remove any old paint, gloss, or varnish, without the need to manually sand. Apply the deglosser using a cloth, then wait for the chemical to penetrate through the surface. Once it soaks through, you should be able to wipe away the residue with a towel. 

Yes. A good mixture to condition your leather is made from one tablespoon of natural baby soap, a splash of vinegar, and 2 cups of warm water. Mix these ingredients in a bowl and use a microfiber cloth to rub it into the leather in small circles. 

You can apply the same technique with a mixture of one part vinegar and two parts linseed oil. Once you’ve applied this to leather with a cloth, let it sit for 10 minutes before buffing with a small cloth.