Get matched with top mailbox repairers in Plainview, TX

If your drawer slides are made of metal or plastic, it’s best to use white lithium grease to lubricate them. The dense formula of that compound creates long-lasting results and should prevent you from having to re-grease the drawer slides frequently. Test the white lithium grease on a small, less-visible area of the slides first to ensure it doesn’t damage the finish before applying to the entire fixture.

There are a few reasons that a drawer won't come out. Most of the time, there's an obstruction of some sort preventing the drawer from acting normally. The key to figuring out the problem is investigation and patience. 

If possible, open the drawer as far as it will go and shine a flashlight inside to see if something in the drawer is hitting the cabinet frame. Or, remove a drawer above or below the offending one and use the flashlight to investigate the drawer slides. Discovering the cause will likely provide the necessary information to develop a solution.

Whether it is worth it to ship your bedroom furniture depends on your priorities, but it can be hard to decide. You should ship your bedroom furniture if the pieces have sentimental or antique value and if it will make you happy to have them in your new home. But if your mattress or box spring is worn out (the average lifespan of a bed is seven to ten years), it's probably not worth the money or effort to ship if you’re moving somewhere where bedroom furniture is readily available. 

Fixing a drawer that is sticky, askew, or broken depends on the specific problem. Start by removing the drawer and examining the slides and tracks for any damage, bent parts, or loose hardware.

For minor issues:

• Clean and Lubricate: If the slides are just sticky, clean them and the corresponding tracks with a hot, damp cloth. Then, apply a lubricant like silicone spray or bar soap to help them glide smoothly. Also, check any roller wheels for problems.

• Tighten Screws: Tighten any loose screws on the slides and tracks. If screw holes are stripped, you may need to fill them and re-drill.

For more significant damage:

• Bent Hardware: If a slide is bent, you may be able to remove it, straighten it out, and reinstall it.

• Broken Parts: If a slide or track is broken or severely damaged, it will need to be replaced. Unscrew the damaged part and install a replacement that matches the type and size of the original.

After performing the repair, reinsert the drawer and test it to ensure it opens and closes smoothly, making any final adjustments for proper alignment. It can also be helpful to consult the manufacturer's guidelines for your specific drawer system.