Get matched with top electricians in Pampa, TX

If you have a lamp that flickers or doesn’t stay on, it’s a sign that it’s time to rewire it. Additionally, it’s important to rewire antique lamps so they’re safe to continue using without the risk of an electrical fire. If the plug on your lamp is more than 15 years old or you notice poor performance like flickering, you should hire a lamp repair service to rewire it. If you’re upgrading the bulbs in an antique lamp from incandescent to LED or CFL bulbs, rewire it so it’s compatible with the modern bulbs.

Using too many Christmas lights can cause your circuit board to overload which can put your tree at risk of catching fire and potentially damage your home’s electrical grid. 

The Occupational Safety and Home Administration (OSHA) requires an electrical panel to have a minimum of three feet (36 inches) of room from the front of the panel to the closest obstacle. In this case, the word obstacle refers to nearly everything, including walls, machines, and other fixed objects. Additionally, panels require at least 6½ feet of headroom in the area directly in front of the fixture. These requirements help ensure safe use of the panel and allow electricians plenty of room to work.

Electrical fixes are best handled by a licensed electrician, but it’s possible to release a wire connection on your own. Be sure to always turn off the power to the outlet at the circuit breaker before beginning your project to avoid electric shock. Carefully insert the tip of a flat screwdriver into the rectangular hole beneath the wire. Hold the outlet in the palm of your other hand. Pull out the wire as you apply pressure with the screwdriver.