Get matched with top basement waterproofing pros in Marfa, TX

Statistics show that 98% of basements will experience some form of water damage over time. However, that doesn’t mean all basements will experience severe flooding. The best way to prevent a water-damaged basement is to keep up with home maintenance and have proper drainage installed outside your home to direct water away from the foundation. You can also consider building a flood wall around the house if you live in a flood-prone area.

One handy thing about whole-house dehumidifiers is, once installed, you don’t have to worry about placement or changing the dehumidifier’s position. But if you are using a portable dehumidifier, we suggest keeping it away from walls, vents, and furniture. It needs a central, unobstructed spot with access to lots of air to do its job.

While a standard gutter system is widely considered the most effective way to prevent water damage to your home's foundation, several alternatives are available. These options can be used on their own in certain climates or as supplementary protection.

Common alternatives include:

• Rain Chains: These are decorative chains that hang from the roof's edge, guiding rainwater to the ground.

• Drip Edges: These metal strips are installed at the edge of the roof to direct water away from the fascia. While often used with gutters, they can be paired with a ground-level solution but are typically not sufficient on their own.

• Rain Dispersal Systems: These systems work by breaking up the heavy sheet of water flowing off the roof, dispersing it over a wider area.

• French Drains: This ground-level system uses a perforated pipe in a gravel-filled trench to collect and redirect water runoff away from the house.

• Drip Paths: Placed directly below the roofline, these paths made of concrete, stone, or other materials prevent soil erosion and guide water away.

It's important to note that some alternatives like rain chains and dispersal systems may not be adequate in regions with heavy rainfall because they don't divert water away from the foundation as effectively as a full gutter system. Ground-based solutions like French drains can be very effective but are often more expensive and can affect your landscaping and curb appeal. Many experts recommend installing a full gutter system for maximum protection and using alternatives as supplementary measures.

It’s not the number of weep holes that should be of concern to builders but rather their spacing. Weep holes are usually spaced anywhere between 16 inches on center when using round tubes or wicking materials and 24 inches on center when using open-head joints. This is a more conservative spacing than the 33-inch maximum spacing on center that’s mentioned in the International Residential Code. All in all, the total number of weep holes a brick exterior should have will depend on the size of the structure.