Get matched with top countertop and backsplash pros in Kyle, TX

Extensive chips and cracks may require a full replacement of the countertop. The cost to install a new countertop is around $3,100 on average. But, if the damaged area is relatively small, you may want to consider repairing it yourself or calling in a qualified professional. Depending on the material, some epoxy and sandpaper may do the trick. Or you can consider painting laminate countertops or refinishing butcher block countertops.

Concrete countertops require regular upkeep and can be harder to maintain than other materials. For daily cleaning, use a mild, pH-neutral cleaner and avoid harsh, acidic products that can damage the sealant. It's important to wipe up spills immediately, especially from acidic substances, as concrete stains easily. To prevent scratches, always use a cutting board. The countertops must be resealed periodically—at least once a year—to protect them from stains and moisture. Be aware that concrete is also prone to cracking over time and may require repairs.

You can cut countertops without chipping by using your saw correctly and having a new fine-toothed blade. You can also put masking tape on the front of the countertop material across the cut line and cut from front to back. However, it is very hard to cut countertops without chipping them, especially if they are made of stone or more fragile materials like laminate. The best advice is to know how to use the equipment, use the correct cutting method for the material, cut from back to front, move slowly, and practice on scrap material first.

Epoxy is typically more affordable than granite, especially if you’re choosing a high-end slab. Most granite countertops cost $75 to $145 per square foot to install, with high-end varieties topping $185 per square foot. 

In contrast, epoxy countertops cost $50 to $150 per square foot to install. The material costs for epoxy are significantly lower than granite, but installation costs can be higher. Rather than simply cutting granite countertops to size before installation, your contractor will need to carefully pour the epoxy over an existing surface.