Get matched with top door pros in Helotes, TX

No, exterior doors don’t need to be prehung, although choosing a door that is prehung makes the installation process far easier. Installing an exterior door that isn’t prehung requires carefully maneuvering the heavy door into place in your door frame, making sure it’s level and plumb on all sides, and then attaching the hinges so that they’re perfectly level and are affixed to the right part of your frame and door. Prehung exterior doors are far more DIY-friendly.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

If you have a sticky door in the summer, the culprit is likely humidity. Humidity can cause wooden doors to swell due to the high moisture levels in the air. A quick fix is to open doors throughout your home to improve air circulation and lower the moisture in your air. A longer-term solution is to use dehumidifiers and ceiling fans.

To build a standard size, six-panel door yourself, you’ll need four 2-foot by 6-foot boards, one 2-foot by 8-foot or 2-foot by 10-foot board, and a sheet of 3/4-inch, paint-grade plywood. The 2-foot by 6-foot boards will serve as your stiles, top rail, and horizontal and vertical mullions, and the wider board will serve as the bottom rail, which is usually wider than the other horizontal pieces. The plywood will serve as the panels, but you’ll need around five 1-foot by 6-foot boards to make your own panels if you want to stain the door rather than paint it.