Get matched with top septic tank pros in Floydada, TX

Getting well water tested costs $100 to $350 if done by a pro. You can also buy DIY test kits for $20 to $100, but professional tests are more reliable. You can get a comprehensive well inspection, which includes advanced water testing, for $700 to $750, which you should do yearly anyway.

A septic system's lifespan typically ranges from 15 to 40 years, with a common average of 20 to 30 years. The longevity heavily depends on the tank's material, maintenance diligence, and usage habits. With proper care, lifespans can reach the upper end of this range.

Lifespan by Tank Material:

• Concrete: 20 to 40 years

• Plastic or Fiberglass: 30 to 40 years

• Steel: 15 to 20 years

To maximize your system's lifespan, follow these maintenance best practices:

• Regular Pumping and Inspections: Have the tank pumped every three to five years and schedule professional inspections regularly.

• Mindful Usage: Only flush human waste and toilet paper. Avoid putting items like cat litter, paper towels, cigarette butts, fats, grease, oils, or coffee grounds down your drains.

• Avoid Chemicals: Do not pour harsh chemicals into the system.

• Water Conservation: Reduce the amount of wastewater your system has to process.

• Protect the Drain Field: Avoid driving or building heavy structures over the drain field area.

Wells should be at least 100 feet deep for drinking water, but they may need to be deeper depending on the local geology, water quality, and your household’s water usage. Work with a qualified well drilling professional who can assess the appropriate depth for your well and test the water before drinking it.

How do you set your well’s pressure tank? All you need to do is first drain the tank of water and find the pressure switch. Remove the switch cover and adjust the switch with a wrench—clockwise to increase water pressure, and counter-clockwise to reduce it. Each complete turn of the nut on the switch should equal 2.5 psi. Once this is done, replace the switch cover. All that’s left is to adjust the pressure of the tank itself using an air compressor and a tire gauge to support the new setting.