Get matched with top roofers in Decordova, TX

Many states require roofers to be licensed, and some states don’t mandate licensing. You can use Angi’s state licensing tool to check if a roofing company holds the proper licensing for your area. A licensed roofing contractor will provide reliable roof installation service, leading to a reduced risk of leaks in the future, which can be expensive to repair. Paying more for a licensed roofer upfront often means paying less over time.

Though cedar shakes often get confused with shingles, there are a few key differences between wood shakes and wood shingles. For one, cedar shingle prices are lower, although shingles are less durable than wood shakes. Cedar shakes are thicker than shingles (shingles range from about 3/8 to 1/2 inches thick, compared to 1/2 to 3/4 inches thick for shakes). Wood shakes are handmade, while shingles are usually machine-made. Also, wood shakes work better on steeper roofs than shingles do. While the cost of cedar shingles is more budget-friendly, there are many great reasons to choose shakes.

Yes, removing a chimney is a difficult and major undertaking. Chimneys often provide structural support to a home, so if it's a load-bearing structure, you'll need to take extra precautions to maintain your home's integrity. A project of this complexity typically requires a structural engineer, a masonry contractor, and a demolition crew. The removal process may involve taking the chimney out brick by brick from inside the walls. The cost for chimney removal can range from $2,000 to $10,000, depending on the job's complexity. Due to the difficulty and cost, some homeowners opt to remove the fireplace and seal the chimney at the top and bottom, sometimes also removing the visible exterior portion at the roofline.

The number of roof vents necessary for a 2,000-square-foot house depends on several factors. The calculation depends on the net free area within the attic and whether your municipality requires a 1/150 or a 1/300 ratio of venting square feet to attic square feet. If you install vents with a square-foot opening of one, you'll need either 14 or seven exhaust vents and an equal square-foot amount of intake vents.