Get matched with top locksmiths in Canton, TX

If part of the key is protruding out of the lock, you can use a pair of needle-nosed pliers or tweezers to gently turn the key in the lock to open the door. If the key is fully inserted into the lock, you may also be able to use a key extractor to help turn the key into the unlocked position. 

But if the key breaks off halfway into the lock or you simply can’t reach it to help engage the unlocking mechanisms, you should probably call a professional.

Door locks should be changed roughly every seven years. The average lifespan of a door lock is seven to 10 years, so it’s best to err on the side of caution and change them early, especially if they are showing signs of wear and tear. Examples of deterioration include visible rust and difficulty opening or closing the door. Some locks can work safely beyond 10 years, but it depends on how often they are used and whether they are exposed to damaging environmental conditions like precipitation or extreme temperatures.

Expect to pay between $50 to $200 if you hire a locksmith to change your locks. That figure includes labor and the cost of basic hardware. The cost will naturally be higher if you plan to install more expensive locks, like smart locks, and if you need a lot of them.

Homeowners can save money by replacing locks themselves. A typical rekeying kit costs about $10 to $25. The only additional cost is purchasing new house keys, and those are no more than a few dollars per key. If you want to replace the locks on your own completely, the main cost is the price of the locks themselves. A standard knob-style lock starts around $25, while electronic locks and smart locks will run in the hundreds of dollars. The only additional tools you should need are a tape measure, screwdriver, and screws if they are not already provided.

It is best to use a dry lubricant, such as a Teflon-based option, for door locks. Unlike popular oil-based lubricants, dry lubricants leave a non-stick, water-repellent coating that does not attract dust, dirt, and other debris. Using an oil-based lubricant can cause these particles to build up inside the lock, making it difficult to operate or even damaging the internal mechanism. You can find dry lubricants, some of which are made specifically for locks, at most hardware stores.