Get matched with top lighting pros in Beverly Hills, TX

While wet-rated and damp-rated lighting is designed to handle contact with moisture, there’s a difference between the two. Wet-rated lighting is safety-rated to be placed in areas with direct exposure to water, including your shower. Fixtures classed as wet-rated are made with waterproof seals to protect the filament and other electrical components from water and moisture. 

Damp-rated fixtures can be used in places with some moisture contact, but not direct exposure. They don’t have the same waterproof seals used in wet-rated fixtures. Damp-rated lighting can be used on your bathroom ceiling or along a wall outside of your shower.

It’s fair to be concerned about handling pool lights or wiring in a pool filled with water. But fortunately, pool lights and swimming pools are designed to make it easy and safe to replace the lights without needing to drain the water. Instead, you can turn off the electricity to the pool as a safety precaution, unscrew the pool fixture, pull it up and out to the side of the pool, then change the bulb.

Yes, outdoor lights and receptacles should be on a ground-fault circuit interrupter (GFCI) for safety. The outdoors is considered a wet location where GFCI protection is generally required. A GFCI enhances safety by automatically tripping and shutting off the circuit if it detects an imbalance, which protects against electrocution and reduces the risk of an electrical fire. While it is the safest approach for all outdoor electrical components, specific requirements can vary depending on the type of light (e.g., pool lights), its location, and local electrical codes. For guidance tailored to your specific situation, it's best to consult a professional electrician.

While most general electricians can repair lamps and light fixtures, it is often better to hire a lamp repair specialist. Many electricians prefer larger jobs, such as fixing electrical systems or relocating fixtures, and may not offer lamp repair services due to the small scale of the work. Additionally, some lamps, particularly antique models, require dedicated expertise that a general electrician might not have. A lamp repair specialist will be familiar with various types of fixtures and can provide a more dedicated service. If you have already hired an electrician for a larger project, you can ask them to look at your lamp, but for a standalone repair, a specialist is typically the best option.