Get matched with top deck maintenance specialists in Asherton, TX

When it comes to rotten deck wood, there really is no fixing it in the traditional sense—it needs to be removed and replaced. While you can certainly do this yourself, we don’t recommend it as some of the issues causing wood to rot could have spread throughout your deck and an untrained eye may not be able to notice. The good news is that replacing deck wood isn’t the most expensive project, and can seriously increase the quality and aesthetics of your home.

Your deck may pop, and your neighbor’s deck may not for a number of reasons. Whether or not a deck pops will depend on how it was made, the conditions it’s exposed to, and the materials. Improper spacing is a common reason for increased pressure between deck boards. Moisture penetration is another.

Lattice should not touch the ground, as it creates a possibility for rot and a termite infestation. It’s best to leave a gap of 3 or 4 inches at the bottom for airflow and to keep the wood dry. You can add stones, bricks, or other decorative pieces to conceal the bottom of the lattice if desired.

Not all porch columns are load-bearing, though they can be. Some porch columns are simply decorative. There are ways to identify a load-bearing column, like looking for visible seams and a foundation. Also, check to see if the column directly enters the ground. In some porch installations, a contractor will excavate a hole to install a column into the earth along with a buried cement base for stability.