Get matched with top structural engineers in Red Bank, TN

Q: Are dormers load-bearing?

• <div><p>Dormers must be able to bear the load of their own construction and the added window. The style of the dormer, however, will determine where the weight loads onto your home's structure. A gable dormer bears the weight on the side walls whereas a shed dormer bears it on the front walls.</p></div>

Q: Can I do my own structural calculations?

• <div><p>No, it&rsquo;s not legal for unlicensed individuals to conduct structural calculations for buildings or building repairs. Not only do licensing requirements prevent DIYers from tackling this project, but mistakes can also be extremely dangerous and put your property and anyone inside or near it at risk of severe injury or even death. You should always hire a licensed and certified local structural engineer to make structural calculations.</p></div>

Q: Can I build over a stump?

• <div><p>Yes, you can build over a stump if the roots are no longer alive. Living roots will continue to grow and may damage your new construction over time. Similarly, you should also remove rotting stumps because they may continue to attract pests and even cause new structures (especially those made from wood) to decompose as well. </p></div>

Q: Is it okay to drill into a load-bearing beam?

• <div><p>You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it&rsquo;s safest to drill and the width and depth of the bit that&rsquo;s safe to use.</p></div>

Q: How do contractors cut a doorway in a concrete block wall?

• <div><p>First, most contractors will have a structural engineer create a report and plan for your project to ensure it&rsquo;s safe to cut into the load-bearing wall. The contractor will then excavate around the wall, if necessary, measure the opening&mdash;allowing for additional space to fit and level the door, and then cut the doorway out. They will likely install a steel lintel as a header over the door for support. Once the doorway is cut out, they&rsquo;ll demolish the concrete using sledge hammers and masonry chisels, clean up the surrounding concrete, and seal around the door with masonry mortar. </p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Red Bank, TN?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Red Bank, TN

*The Angi rating for Structural Engineering companies in Red Bank, TN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Red Bank, TN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on April 12, 2021

Reviewed in April 2021
I hired Newsom Construction for two separate projects. Each project was completed leaving me exceptionally satisfied. Project 1: living room/ kitchen remodel This project was done in July 2019. It involved knocking down two walls, while also inserting a new structural beam from the attic. A...
Greg Newsom Construction
Request a quote
Reviewed in December 2020
This man seemed very professional, but I was somewhat dissatisfied with two things; 1) he told me after the inspection he would recommend businesses to do any or all repairs. I clarified this would include interior damage caused by the potential structural damage and he agreed. This was not the...
R4 Engineering, PLLC
Request a quote
Reviewed in March 2020
Stephen was good and easy to work with. The crew arrived with materials and began the installation methodically. The materials for the project were of excellent quality and in original packaging. Installation crew, Carl and Kevin, took necessary time to make final product structurally strong...
AES Contracting, LLC
Request a quote
Reviewed in March 2019
Anyone who has ever lived with an engineer knows that, as a group, they are not easily impressed: Pick, pick pick.... They just can’t help themselves. But this was not the case when my husband, the you-know-who, hired Casey Powell to design and build our deck. Even from the start, Casey’s...
Casey Powell
Request a quote
Reviewed in January 2019
I have worked with the Smart Systems for 7+ years. Engineering is superior from both professionalism and technical expertise. Project Management is effective but has room for improvement.
Smart Systems
Request a quote
Reviewed in September 2018
On June 5 Tri State cut 5 Leyland cypress for us. I have no complaints whatsoever with their work and their price was unbelievably lower than 2 other estimates. But their truck struck our bridge when they came in and bent the side rail. I asked if they could find an engineer to come check the...
Tri- State Tree Service
Request a quote
Reviewed in January 2018
Calvin did a great job. He obviously loves what he does. I first hired him to refinish 1930's hardwoods hidden under carpet and other flooring and when he got to it he showed me that it had been sanded as far as it could be sanded(it was the thickness of a credit card). He advised me to...
Wood Floor Pros
Request a quote
Reviewed in January 2016
I had rot and mold issues that affected structural beams in my house that I was unaware of. Matt and his team diagnosed the issue immediately and because mold was revealed, he treated it with the utmost importance and urgency. Unfortunately, when it rains, it pours and right before Matt and his...
Quality Home Improvements
Request a quote
Reviewed in November 2015
The project came out beautifully. It was just a pleasure working with all the tradesmen and Andrew is an honest, straight-forward person. They do top rate work and are easy to work with and dependable. The original quote came in a bit higher than I had hoped and Andrew was willing to work with...
Bleu Bayou Remodeling, LLC
Request a quote
Reviewed in April 2014
In February 2013 we engaged with Thomas General Contracting to build and extend a deck in our back yard. They completed the work in March 2013. Recently we became aware of several structural, cosmetic, and safety issues with the deck. We approached the City of Chattanooga to request...
Thomas General Contracting
Request a quote

Find Structural engineers in Red Bank

MIP Engineering Group, LLC

4.8(

)

Serving Red Bank, TN and surrounding areas

Approved

In business since 2018

Free estimates

Credit card accepted

"Magdiel was very helpful. He has done the detailed inspection, issued a very good report with the recommendation. In the way that it can be done without changes in the existing structure, just by adding reinforcement in design, which requires minimal cost for material and work hours. Thank you, and we would be glad to hire him for the next projects."

Response time5 hrs

Response rate85%

Recommended by100%of homeowners

Serving Red Bank, TN and surrounding areas

Approved

In business since 2009

Small jobs welcome

Offers commercial services

"great to work with would recommend to anyone in need of structural engineer"

Response time6 hrs

Response rate97%

Recommended by96%of homeowners

Request Quote

MTW Engineering, PLLC

5.0(

)

Serving Red Bank, TN and surrounding areas

Approved

In business since 2025

Free estimates

Emergency services offered

"I called and was able to get in inspection done the next day. Very professional and courteous. Highly recommend."

Response time2 days

5 neighbors recently requested a quote

Request Quote

Sears Home Improvement Products

3.7(

1,712

)

Serving Red Bank, TN and surrounding areas

In business since 1886

Free estimates

Credit card accepted

"I had to have them back out and redo the tile. We've already replaced the nuts and bolts in the drawers that were falling out."

Recommended by74%of homeowners

Request Quote

JM Structural Consulting LLC

New to Angi

Serving Red Bank, TN and surrounding areas

In business since 2010

Free estimates

Credit card accepted

JM Structural Consulting LLC is a locally owned and operated company that values honesty and integrity and treats your home as if it were our own. We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumer's needs. It is our mission to provide excellent workmanship and complete customer satisfaction from start to completion of a project. In order to understand the needs and expectations of our customers, we take great care to work and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.

Request Quote

Structural Engineering questions, answered by experts

Dormers must be able to bear the load of their own construction and the added window. The style of the dormer, however, will determine where the weight loads onto your home's structure. A gable dormer bears the weight on the side walls whereas a shed dormer bears it on the front walls.

No, it’s not legal for unlicensed individuals to conduct structural calculations for buildings or building repairs. Not only do licensing requirements prevent DIYers from tackling this project, but mistakes can also be extremely dangerous and put your property and anyone inside or near it at risk of severe injury or even death. You should always hire a licensed and certified local structural engineer to make structural calculations.

Yes, you can build over a stump if the roots are no longer alive. Living roots will continue to grow and may damage your new construction over time. Similarly, you should also remove rotting stumps because they may continue to attract pests and even cause new structures (especially those made from wood) to decompose as well.

You should avoid drilling or cutting into load-bearing beams because removing material will weaken it and increase the risk of structural damage or even collapse. If you do need to drill into a load-bearing beam, speak with a structural engineer first to discuss where it’s safest to drill and the width and depth of the bit that’s safe to use.

First, most contractors will have a structural engineer create a report and plan for your project to ensure it’s safe to cut into the load-bearing wall. The contractor will then excavate around the wall, if necessary, measure the opening—allowing for additional space to fit and level the door, and then cut the doorway out. They will likely install a steel lintel as a header over the door for support. Once the doorway is cut out, they’ll demolish the concrete using sledge hammers and masonry chisels, clean up the surrounding concrete, and seal around the door with masonry mortar.

The Red Bank, TN homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Alison Kasch
•
Apr 4, 2026Apr 4, 2026
How Much Does It Cost to Remove a Load-Bearing Wall? [2026 Data]
Do you have a load-bearing wall standing between you and your projects that you want to remove? Learn about the cost of removing a load-bearing wall.
Lyle Hendriks
•
May 5, 2026May 5, 2026
How Much Does Beam Installation Cost [2026 Data]
Beam installation costs are an important consideration if you’re building a home or doing renovations. Learn about average costs and factors in this guide.
Timothy Moore
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install an LVL Beam? [2026 Data]
Looking to remove load-bearing walls and vertical supports to open up your living space? Learn about what affects the cost to install an LVL beam.
Rachel Hoffman
•
May 3, 2026May 3, 2026
10 Signs of Structural Damage in Your Home
Keeping your home safe and structurally sound should be a top priority. Learn to recognize the signs of structural damage you should never ignore.
Kyle Schurman
•
Mar 19, 2026Mar 19, 2026
Who to Hire to Replace a Sill Plate?
A sill plate needs to be replaced when it starts to rot out. Use this guide to help you know who to hire to replace a sill plate at your home.
Em Norton
•
May 5, 2026May 5, 2026
How to Hire a Structural Engineer: Complete Guide
It can be hard to choose the right pro for any job, but it matters. Learn how to hire a structural engineer who'll get the job done right from start to finish.